Tear Resistance and Puncture Resistance Tester for Gloves
USD $4,200 - $5,000 /Set
Min.Order:1 Set
Dongguan Zonhow Test Equipment Co., Ltd
Tear Resistance and Puncture Resistance Tester for Gloves
Overview:
Tear Resistance Testing for Gloves: The resistance to tear is defined as the force necessary to propagate a tear in a rectangular specimen slit half way along its length.
Puncture Resistance Testing for Gloves: Puncture resistance is defined by the force exerted by a steel stylus of defined dimensions to puncture a test specimen held on a retaining device. It should not be confused with piercing exerted by thin tips or needles.
Test Specimen:
Tear Resistance Testing:
The test specimen dimensions are defined in Figure 5. Dimensions of the specimen to be tested: (100 ± 10) mm × (50 ± 5) mm. A (50 ± 5) mm incision is made in the longitudinal direction of the sample, (25,0 ± 2,5) mm from the edge. The incision shall be made with a sharp blade straight and perpendicular to the specimen surface. In case the glove contains reinforcements (e.g. pads) in the palm, the test specimen shall be taken from the layers without these reinforcements. Where the test specime is made of several unbonded layers, the test is performed on each layer. The classification is based on the layer with the highest performance level.
Setting up the specimen: At least 20 mm of each pre-cut defined strip (see Figure 6) is clamped in a tensile tester with the jaws at least 10 mm apart such as to guarantee a pulling direction parallel to the longitudinal direction of the specimen.
Puncture Resistance Testing:
A circular specimen with a minimum diameter of 40 mm is taken in such a way that seams, reinforcements or extra thicknesses are located outside the clamping area and the point of perforation. In the case of several unbonded layers, these layers are tested together. In case of an irregular design of the palm, all areas shall be tested; the final result is the lowest obtained value.
Recommended Rubber Tensile Testing Machine
Recommended Our Model DZ-101, Double Column Universal Tensile Tester
Equipped with Professional Holder and Clamps
Click to Talk More with Us
Other Test Equipment of Gloves Recommended
EN388 Gloves Anti-Cut Tester Martindale Gloves Abrasion Tester
ZONHOW Though 10 years of continuous development, our company has established the main products line of Universal strength testing machines. Environmental testing chambers and Cell phone, computer testing machines. Package and paper print test equipment and so on! Our equipment is used in over 80 countries worldwide and supported by a network of offices and approved agencies. Our products are used in all industries and educational sectors and we have an enviable reputation for innovation, quality product and excellent customer support.
1.Are your company a trading one or a factory ?
Factory + trade (integration),12 years focusing on test instruments field,5 years exporting experience.
OEM is also acceptable for us.
2.How to choose the most suitable products?
Our professional team will give you the best suggestion as long as you tell us what kind of test you
need to do and the required specification.
3.What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20
working days after deposit receipt. If you are in urgent need, we can consider making special
arrangement for you.
4.Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines according to
your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
5.Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to
arrange hotel and pick up you from airport.
6.Do you have customers of our country before?
Now our testing machines have been sold to more than 120 countries, like USA, Canada, Russia,UK,
Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam,Iran,
Brazil and so on.
7.How about your warranty?
Generally, our warranty is one year. Within the warranty period, we can offer technique support and
part parts change, necessarily, our engineers may go to your place for better service.
8.How about the packing for machine, is it safely protected during transportation?
Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many
testing machines abroad by sea or by air without damage.
9.What is the order process?
Inquiry - quotation - communication - order confirming - deposit payment - production - testing and
debugging - balance payment - packing - delivery - customer receiving - after service.
10.How to install and use the product
The product is shipped with an operating instructions and video of English version.