The DSE5110 is an Automatic Start ControlModule designed to automatically start and stop diesel and gas generating sets that include non electronic engines.
The module also provides excellent engine monitoring and protection features.
The module has the ability to monitor under speed, over speed, charge failure, emergency stop,low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault
conditions on the LCD display and via the LED indicators on the front

SPECIFICATION

DC SUPPLY
8V to 35V continuous

CRANKING DROPOUTS
Able to survive 0V for 50mS, providing the supply was at least 10V before dropout and supply recovers to 5V

START RELAY OUTPUT
16A DC supply at supply voltage

FUEL RELAY OUTPUT
16A DC at supply voltage

AUXILIARY RELAY OUTPUTS
5A DC at supply voltage

CHARGE FAIL/EXCITATION RANGE
0V to 35V

MAXIMUMOPERATING CURRENT
320mA at 12V, 215mA at 24V

MAXIMUMSTANDBY CURRENT
175mA at 12V, 95mA at 24V

ALTERNATOR INPUT RANGE
15V (L-N) to 333V AC (L-N) absolute maximum

ALTERNATOR INPUT FREQUENCY
50-60 Hz at rated engine speed (Minimum: 15V AC L-N)

MAGNETIC PICK-UP VOLTAGE INPUT RANGE
+/- 0.5V to 70V Peak

MAGNETIC INPUT FREQUENCY
10,000 Hz (max) at rated engine speed

MODULE DIMENSIONS (WXH)
240mm x 172mm
9.4” x 6.8”

PANEL CUT-OUT (WXH)
220mm x 160mm
8.7” x 6.3”

MAXIMUMPANEL THICKNESS

8mm
0.3”

Factory:

Certifications: