Name: 4 axi cnc router and 1.8 degree hybrid nema 11 step motor with square use in camera cut machine and robot arm
Brand: PrimoPal
Availability: InStock

Product Details

PHB28Y series hybrid stepper motors are supplied by one of the China's top stepper motor suppliers (PrimoPal Motor). These NEMA 11 square stepper motor with 1.8° step angle (200 steps/revolution) are made of high-quality cold rolled steel sheet and anti-high temperature permanent magnet. The body length of PrimoPal's NEMA 11 stepper motors ranges from 28mm to 50mm, and the holding torque could be as high as 10N.cm (14.1oz-in). These high-performance and high-reliability NEMA 11 stepper motors are terminated with four or six flying ended lead wires, and could be easily connected to the constant current or chopper drive controllers.

Step Angle	1.8°
Step Angle Accuracy	±5% (full step, no load)
Resistance Accuracy	±10%
Inductance Accuracy	±20%
Temperature Rise	80 °C Max.(rated current, 2 phase on)
Ambient Temperature	-10 °C ~ +50 °C
Insulation Resistance	100 MΩ Min., 500VDC
Dielectric Strength	500 VAC for one minute
Shaft Radial Play	0.02 Max. (450 g-load)
Shaft Axial Play	0.08 Max. (450 g-load)

Note: We also could manufacture the custom stepper motors, according to the customer's requirements.