BOSCH 0445115041 injector

T max.:100 °C; J:118 mm; A1:42 mm; E:20 mm; H1:16 mm; Designation BOSCH injector of housing:PAE212N-; d1:82 mm; Recommended tightening torque GDA Hydraulic-Electrical Co., Ltd. for set screw:22 Nm; Z:30.5 mm; C0:32.8 kN;

M:91.5 mm; d2:133 mm; d1:113 mm; f:10 mm; B:2.5 mm; d:95 mm; Mass lock washer:0.094 kg;

A:31 mm; B:30 mm; S:8 mm; G:M6x1; A2:40 mm; d:30 mm; N:12mm; C0:11.2 kN; L1:72 mm; Weight:0.87 kg;

Product Group:B00308; Nlim (oil):14,000 rpm; ra max:1 mm; Precision Class:ABEC 1 | ISO P0; Dynamic load, C:17.9 kN; Outer Race Width:0.63 Inch | 16 Milli; Keyword String:Ball; Min operating temperature, Tmin:-20 °C; Minimum Buy Quantity:N/A; UNSPSC:31171504;

d1:138.113 mm; Mass adapter sleeve assembly:9.4 kg; B:25 mm; B4:27.5 mm; Lock nut:KM 32; d3:210 mm; B1:147 mm; Hydraulic nut:HMV 32 E; d:160 mm; G:M 160x3;

D:160 mm; Static load, C0:274 kN; D1:136 mm; Nlim:5,200 rpm; Da max:148 mm; Nref:4,000 rpm; Number of lubrication holes:0; d2:97.7 mm; Min operating temperature, Tmin:-40 °C; da min:87 mm;

A1:13 mm; d:49.21 mm; H:190 mm; A4:37 mm; s1:25.8 mm; A2:56.6 mm; C:35.1 kN; Recommended tightening torque for set screw:16.8 Nm; G:R1/8"; Designation of housing:FLZ210-;

S:22.2 mm; T min.:-40 °C; r:1.1; Recommended tightening torque for set screw:16.8 Nm; SW:4.76 mm; m:9 mm; B:55.6 mm; T max.:100 °C; d:55.56 mm; C1:7.2 mm;

H:160 mm; SW:5.56 mm; Recommended tightening torque for set screw:27.1 Nm; d:57.15 mm; G:M6x1; A3:3.5 mm; s1:35.5 mm; A5:45 mm; A:46 mm; Designation of housing:C312-;

J min.:571.5 mm; J1:127 mm; Stabilizing ring:SR-40-34; Initial grease fill:2154.6 g; Cap bolt, SAE grade:5; Labyrinth ring:2 x LOR 139; PG:1/4 NPT; Mass pillow block:213 kg; Cap bolt recommended tightening torque:271.2 N·m; da:149.225 mm;

Characteristic outer ring frequency, BPF0:4.09 Hz; Category:Single Row Ball Bear; finish/coating:Uncoated; Minimum Buy Quantity:N/A; maximum rpm (grease):7100 rpm; Keyword String:Ball; Static load, C0:23.2 kN; Bore:1.969 Inch | 50 Mill; bore diameter:50 mm; Weight / Kilogram:0.441;

H3:105; e:10 mm; s1:23.2 mm; T min.:-20 °C; J:132 mm; Dz:95 mm; B1:38 mm; A1:10 mm; B:22 mm; A:38 mm;

B:66 mm; T min.:-20 °C; Designation of housing:FL311-; N:25mm; Recommended tightening torque for set screw:27.1 Nm; A2:71 mm; S:25 mm; T max.:100 °C; A:52 mm; L:150 mm;

S:6 mm; e:17 mm; T min.:-20 °C; C0:4.78 kN; G:M6; Designation of bearing:US203-11G2T20; Dz:46 mm; Recommended tightening torque for set screw:3.2 Nm; A1:9.5 mm; N:11,5mm;

Recommended tightening torque for set screw:11.5 Nm; S:10.2 mm; Designation of closed end cover:SCC209; C:31.85 kN; Designation of housing:SP208-210/85N-; SW:4 mm; d:45 mm; Weight:3.91 kg; L1:260 mm; Z:69.3 mm;