T max.:100 °C; G:M10x1; Designation of housing:FC214-; Weight:6.87 kg; C0:45 kN; L:215 mm; e:17 mm; Recommended tightening torque for set screw:22 Nm; B:68.2 mm; T min.:-20 °C;

Designation of bearing:UC216-51G2L3; J:153 mm; Weight:7.09 kg; T min.:-20 °C; A2:90.6 mm; C:72.5 kN; S:33.3 mm; Recommended tightening torque for set screw:27.1 Nm; N:23mm; A:61 mm;

Cage Material:Brass; EAN:4547359146530; r1s min:2.1 mm; Separable:Inner Ring - Both Si; Mass (without HJ ring):1.92 kg; da max:75 mm; Rolling Element:Cylindrical Roller B; Number of Rows of Rollers:Single Row; UNSPSC:31171547; Static load, C0:126 kN;

Basic Load Rating, Dynamic Rating(N):34100; Days to Ship:Quote; Unit Body Material:Cast Iron; Unit Body Material:Cast Iron; Stroke:No; Fit:J7; Seal:Triple seals; Surface Treatment:No; Fit:J7; Basic Load Rating, Static Rating(N):21300;

Ab - Cage-Cone Frontface Clearance:0.11 in; R - Cone Backface To Clear Radius3:0.06 in; G1 - Heat Generation Factor (Roller-Raceway):21; d:1.7500 in; K - Factor8:1.15; C1 - Dynamic Radial Rating (1 million revolutions)6:11100 lbf; Cg - Geometry Factor:0.0766; C90(2) - Dynamic Radial Rating (Two-Row,

Design Units:Imperial; a - Effective Center Location3:-9.4 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; B - Cone Width:25.433 mm; B:23.818 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:17200 lbf; G1 - Heat Generation Factor (Roller-Raceway):19.3; C0 - Static Radial Rating:18400 lbf; Cone

Max. Allowed rpm(rpm):5900; Types:Bearing for the main; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Specifications/Environment:Standard; Bearing Style:Open Type; Rolling Element Material:Steel; B:16; Outer Ring Shape:Flat; Type:Angular Contact Ball;

Bearing Retained:No; Days to Ship:14 Days; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing Material:Steel; Seals:ZZ (Double Shield); Volume Discount:Available; Flange Shape:Square Type; Bearing Part Number:6003; Seals:ZZ (Double Shield);

S:14.3 mm; Weight:0.84 kg; B:34 mm; e:19 mm; Designation of closed end cover:SCC205; C:14 kN; Recommended tightening torque for set screw:3.7 Nm; A1:11 mm; T max.:100 °C; Designation of housing:FE205N-;

B:9 mm; Characteristic cage frequency, FTF:0.42 Hz; Dynamic load, C:6.4 kN; ra max:0.3 mm; f0:14.7; Static load, C0:3.7 kN; Characteristic outer ring frequency, BPF0:4.58 Hz; D:37 mm; Fatigue limit load, Cu:0.17 kN; Max operating temperature, Tmax:120 °C;

e:20 mm; Recommended tightening torque for set screw:8 Nm; T min.:-20 °C; A2:51 mm; C0:20.8 kN; N:14mm; H3:105; s1:20.6 mm; A:36.5 mm; J:148.5 mm;

Size Unit:Inch; Material:52100 Steel; Material:52100 Steel; Diameter(inch):2-1/2; Days to Ship:8 Days; Size Unit:Inch;

Dz:70 mm; C0:11.2 kN; T min.:-20 °C; G:M6x1; S:15.9 mm; d:30 mm; T max.:100 °C; s1:19.05 mm; H:39.7 mm; N:14mm;

Inner/Outer Ring Material:Steel; Width(mm):23; Types:7*** series; Combination of Angular Contact Ball Bearings:Back Combination; B:46; Symbol of contact angle:A; Bearing Style:Open ShanDong Manufacturing CO., LTD. Type; Bearing type symbol:No; Days to Ship:9 Days; Preload Mark:No;

Seals:VV (Non-Contact Rubb; Width T(mm):50; Bearing I.D. d(mm):12; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Flange Shape:Square Type; Flange O.D. H(φ):50; Housing Material:[Aluminum Alloy] 201; Volume Discount:Available;