750KV High Voltage Power Transformer Oil Purifier System Equipment,PLC Oil Purifying Machine

Application:

ZUD Series Ultra-High Voltage Transformer Oil Purification Machine is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. ZUD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer.

Performance:
Re-refining to remove acids and particulate material
Dehydrating to remove free and dissolved water, including insulation dry-out of the windings.
Degassing to remove other dissolved combustible gases such as Acetylene, Ethylene, Ethane, Methane, Hydrogen and Carbon Monoxide, and Carbon Dioxide.
Index Before Purification(from customer for your reference)

water content ≤50ppm
gas content ≤10%(by volume)
breakdown voltage ≥30KV/2.5mm
particle qty≤70000 (5-50micron)


Index after purification (test at oil-outlet of the machine) :
water content≤ 5ppm
gas content≤0.1%( by volume)
acetylene content:0
breakdown voltage≥75KV (Spherical polar)
particle qty in 100ml oil≤500 (5-50 micron), (0 for ≥100 micron particle).
dielectric loss tgδ≤0.3% (90°C)
acid value ≤0.1mgKOH/g

Flow Chart

The oil to be treated passes through a strainer and enters the heater for heating, the heated oil will go through the semi precision filtration and arrived at the Spiral spray atomization separation system, The insulating oil turns into a coarse mist and falls onto the reaction tower to enter the vacuum separation chamber. The moisture begins to evaporate and the oil mist forms a three-dimensional, multi-layer evaporation structure in the tank, which can be purified through a short-term cycle. After dewater, degas, and impurity ,acid removal, the treated oil will go through the precision filtration to achieved the purifier circulation purpose. The Water vapor molecules and the hot air are separate from the vacuum separation chamber enters the condenser ,Most of the water vapor is condensed into water and stored in a water tank. The hot air in the oil is cooled and discharged by a vacuum pump.

Aftre treatment

We also have several plans for your choose;

1.Optional P.L.C. intelligent panel control, touch screen operation and dynamic display according to user needs.

2.Optional Online PPM Meter, Optional flow meter with accumulator function.

3.Optional frequency converter, you can adjust the flow according to your needs

4.Optional external port design for transformer vacuum pumping

5.The whole structure can be made into mobile, fixed, fully enclosed, concealed, canvas, open type.

6.Optional three stage high vacuum system for higher vacuum degree work.

ASSEN warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of twenty (20) months from date of shipment or eighteen (18) months after the start-up of the system. ASSEN's obligation under this warranty is limited to repairing or furnishing, a similar part to replace any part, which was proven to be defective within the warranty period.

1. We customize the machine as your requirements.
   2. We have more than 20 years export experience.
   3. We offer our customers high quality products at competitive price.
   4. We offer our customers excellent after-sales service.
   5. We are not satisfied until our customers are satisfied.

Please contact:ASSEN

email:sales@assenpe.com

whatsapp:+86-15223801122