zhengfan battery 12v 60ah lead acid start stop car battery MF automotive car battery S95 6-QTPE-60 EFB CAR BATTERY
USD $25 - $90 /Piece
Min.Order:100 Pieces
Hebei Zhengfan Battery Co.,ltd
zhengfan battery 58043 lead acid MF automotive car battery 6-QW-80 mf auto battery
zhengfan battery N51 lead acid MF automotive car battery 6-QW-51 mf auto battery
zhengfan battery N72 lead acid MF automotive car battery 6-QW-51 mf auto battery
zhengfan battery 12v 45ah lead acid MF auto starter battery 6-QW-45 55B24R/L CAR BATTERY
zhengfan battery 12v 60ah lead acid MF automotive car battery 6-QW-60 55D26R/L CAR BATTERY
EFB start stop car battery | |||||
Item No | plasts No(PC) | Net weight ±0.5KG | Fross weight ±0.5KG | battery size (MM) | packing size (MM) |
6-QTPE-60 12V 60AH CCA640 | EFB80L-15 | 17.8 | 18.3 | 242*175*190 | 252*183*210 |
6-QTPE-70 12V 70AH CCA700 | EFB80L-17 | 20.1 | 20.6 | 274*170*290 | 292*185*212 |
6-QTPE-80 12V 80AH CCA800 | EFB80L-17 | 21.3 | 21.8 | 315*175*190 | 325*183*210 |
Q85 6-QTPA-60 12V 60AH CCA610 | Lead calcium120-12 | 17.5 | 18 | 232*173*225 | 240*183*250 |
S95 6-QTPA-70 12V 70AH CCA645 | Lead calcium120-13 | 19.3 | 19.8 | 260*173*225 | 268*183*248 |
T7 6-QTPE-75 12V 75AH CCA700 | EFB12-17 | 21.4 | 21.9 | 310*170*175 | 320*185*195 |
T7 6-QTPE-75 12V 75AH CCA650 | EFB54L-19 | 19.6 | 20.1 | 310*170*175 | 320*185*195 |
Health and safely
Precautions
• Always handle batteries with care.
• Always store upright.
• Never over-fill with acid.
• Always charge in a well ventilated place.
• Always wear eye protection when handling batteries.
• Wear protective clothing if there is any rick of acid splashing.
Danger
• Do not use at the places near fire. Hydrogen gas generated from battery may cause fire and explosion.
• This 12v battery is only for starting engine. Do not apply for other uses.
• Keep out of the reach of children or the personnel who do not understand the manual. It may cause blindness or severe burn.
• When using the battery, wear safety glasses and rubber gloves.Sulfuric acid may cause blindness or severe burn.
Warning
• Replacement of battery shall be performed as per following order. If failed, it may cause fire and explosion. Remove cable from negative terminal first.Connect cable to negative terminal last.
• When connect cable to battery, make sure not to get changed post of +and -. It may cause the damage of electronic components or fire.
• When ueing the battery ,handle with care,sulfuric acid may cause blindness or severe burn.
Caution
• When moving battery, be careful not to drop the battery , which is heavy, Do not shake the battery with handle, if there is the handle, It may cause the injury.
• Do not shore the battery at the following places. High temperature and humidity. Being exposed to rain,snow, direct sunshine.
FAQ
Q1: What is your terms of payment?
A: 30% deposit in advance, 70% balance pay off against the copy of bill of loading.We'll show you the photos of the products and packages before you pay the balance.
Q2: What’s kinds of battery will you provide?
A: We have three type battery: There are many different model battery here, we can supply 2v 100ah-3000ah battery, 4v 0.25ah-4v 4.5ah battery, 6v 1.3ah-6v 12ah battery, 12v 0.8ah-12v 250ah battery.
Q3: Operating temperature
A: Discharge: -15--40C
Charge: 0--40C
Storage:-15--40C
Q4: Can you print my logo on the battery cover?
A: Yes, OEM is available,we can print your logo on the battery case, and you can offer your logo.
Q5: How to maintain the battery?
A:The battery should be stored in clean, dry, ventilated, dark environment when not using, keep it after full charge, recharge it every 3 months or 6 months.
Q6: If a battery fails, what will be the indications?
A: 1.Lower performance
2.Low voltage
3.Cannot charge/recharge
4.Swelled container
5.Acid corrosion
Q7: How can you tell if a battery is good or bad?
A: You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.
Q8: Why "zero voltage" might happen?
A: Zero voltage means there is a broken circuit. There could be several reasons for a zero voltage state.
1.There could be a broken electrode column
2.Welding defects of the partition
3.Welding defects of the terminal