echnical specification and functions
1.It can not only apply static detection, dynamic detection and optional detection to injection angle, dribbling, atomization and uniformity coefficient of one or more fuel injectors, but also simulate the performance of the engine and observe the overall operation process of the injectors.
2.Detection range
A. Pulse width: 1ms~20ms Step: 0.1ms
B. Injection times: 0~10000 Step: 50
C. Rotation speed: 0~10000 r/min Step: 50r/min
D. Injection time: 0 ~10000 sec Step: 5 sec
Can arbitrarily set the rotation speed, injection time and times counting, injection pulse width and injection mode within the suggested range above, and the detecting mode may be static or dynamic, acceleration or deceleration. And the detecting process can be paused and resumed to original program.
3. Can diagnose one or more fuel injectors and employ automatic cleaning, reverse flushing and ultrasonic cleaning.
4. Diagnose under either injection time mode or times counting mode, the latter being the default detection mode. If time counting mode is wanted, just set the parameter manually. The system will digitally display the parameter, ease and simplicity of operation.
5. Has a unique two-line system which is applicable to all fuel injectors. The automatic discharge can prevent the liquid flow back to the cylinder.
6. Can do reverse flushing and disaffiliation-free flushing.
7. In case of different models of fuel injector, just use suitable plug and change the “O” ring.
8. The machine adopts micro-computer technology and mechanotronics design, together with clear digital display and power supply of 400W and specified protective device for injection.
9.The machine has powerful, reliable and clocked ultrasonic cleaning system, whose ultrasonic frequency is 40KHz. Work in accordance with fuel injector manufacturer’s suggestion, preventing any damage to the fuel injector. There are different connectors for different fuel injectors, applicable to standard model, Hose-Taic model, K model, TBL model, etc. Micro-computer control automatically regulates the fuel system pressure. The prevention over excess pressure can ensure fuel flow and normal pressure.
How to operate
The machine can detect the feature of the fuel injectors and diagnose and clean them. There are four diagnosis and cleaning patterns: Continuous spray cleaning, manual cleaning, automatic cleaning, and ultrasonic cleaning. This device also provides reverse flushing and disaffiliation-free flushing when needed. The following must be ensured before utilizing this equipment.
First, switch on
Connect the power cord to the socket on the right and employ AC 220V, and turn it on.
Second, fill detecting liquid
With power on, the original interface will immediately display “0000”. Press “DRAIN” and put the small funnel into the glass test tube, into which pour cleaning liquid, until the high level light is on. Press “DRAIN” again to switch off.
Third, inspect the impedance of fuel injector
Remove the fuel injectors yet to be inspected from the car, mark them in sequence and find out their impedance by digital multimeter, the difference of which can’t exceed 1Ω, otherwise the injector must be replaced.
Fourth, fix the testing bay
Connect the fuel injectors to the oil circuit of the device, then fix the circuit with a bolt and insert the pulse signal cord to the injectors. For excess connectors, just replace them with the plugs in the tool box.
Continuous Spray
When power is on, tune the oil pump to the needed pressure and hold “CLEAN” key. Release the key to stop cleaning.
>>> Main products include:
1, Diesel engine parts (nozzle, plunger, delivery valve, head Rotor, injector, fuel pump and other accessories) 2, Injection pump test bench 3,auto tools 4 Auto parts 5, special vehicles 6 , Turbocharger.......
Production process using advanced computer control and digital display systems, production technology, strong technical force . High quality, high technical performance, with micro-controller and digital functions. Products are sold more than 100 countries and regions of all world .
Jun Zhao (MANAGER)
Taian Dongtai Machine Manufacturing Co.,LTD
Mobile Phone: +86-18953837331
TEL: +86-538-2096183
FAX: +86-538-2096189
E-mail: dongtaidiesel@
Skype: dongtaidiesel@
QQ: 15588559500
WeChat/WhatsApp/Viber: +86- 18953837331
Web Site :
You May Like
- NTC diesel fuel tank cleaning tester
- Mastech MS8268 3 3/4 Autorange Digital Multimeter 4000 Counts LCD Display 1000V
- 4000 Counts Auto-Ranging Digital Multimeter MS8268
- Mastech MS8268 Digital Multimeter AC/DC Auto/Manual Measurement
- Popular Digital Multimeter M890G digital multimeter ms8268
- diesel engine connecting tube F00RJ01659 common rail spare parts
- MST-880 Spark Plug Tester
- Auto Flush Machine 501+ Launch 501+ ATF Charger
- Heavy Duty Scanner
- Professional Truck HD Diagnostic Tool Based On Android LAUNCH X431 PRO3 Heavy Duty Truck Diagnostic Computer&Adatpers Box
Popular Searches
Find Similar Products By Category
You May Like
- CT16 Turbocharger 17201-0L030 for Toyota Hilux 2KD-FTV 2KD 2.5L Engine
- 2500Bar 250MPa PRESSURE GAUGE
- Hot Sale Turbocharger TF035HM with Engine 8140233700 Turbo 49135-05000 49135-05020 OEM 99450703 7410216 Turbo For Iveco
- Dong Tai LAUNCH 501 + atf oil automatic transmission fluid
- Hot Sale Launch CAT 501 Auto Transmission Fluid Machine for Transmission Fluid Change Cat501+
- Fully automatic small patch machine
- CR816 Common Rail Injector And Pump Test Bench HEUI Test EUI/EUP Test
- DT-3C Turbocharger Balance Machine
- 0 250 202 136 glow plug 0250202136 /0 250 202 136 1.5v
- DT-L925 Wheel Loader
- DT-L920 Wheel Loader
- No958 P-type plunger retainer clamp
- NO.953 5M pump Socket Tools
- NO.947 Pump Scratcher
- NO.938 Disassemble Flyweight Tool