Grease Speed Rating Open/Shielded n1:4500 rpm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:5300 rpm; Bore d:70.000 mm; Outside Diameter D1:150.0000 mm; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3000 rpm; Oil Speed Rating n2:5300 rpm; Width B:35.00

Outside Diameter D1:32.0000 mm; Width B:7.00 mm; Sealed Speed Rating n3:13000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:3510 N; Basic Static Radial Load Rating Co:2240 N; Fille

Sealed Speed Rating n3:2900 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; Width B:18.00 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Dynamic Radial Load Rating C:33800 N; Basic Static Radial Load Rating Co:33500 N; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Outside Diameter D1

r1,2 min.:2.5 mm; Basic dynamic load rating C:220 kN; Da max.:100 mm; r3,4 min.:2.5 mm; Reference speed:5000 r/min; a:26.642 mm; db min.:66 mm; B:39 mm; Db min.:104 mm; ra max.:2.5 mm;

Basic Static Radial Load Rating Co:45000 N; Grease Speed Rating Open/Shielded n1:6000 rpm; Sealed Speed Rating n3:4000 rpm; Fillet Radius ra:2.00 mm; Bore d:45.000 mm; Width B:29.00 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; Outside Diameter D1:120.0000 mm; Accessories:One Seal; Basic Dynamic R

B1:152.629 mm; Locking plate:PL 52; Sleeve:S 3052x9.7/16; d3 max.:309.702 mm; d1:239.713 mm; Mass adapter sleeve assembly:18.5 kg; G:258.877 mm; Hydraulic nut:HMVC 52E; Threads per inch:6; Lock nut:N 052;

Bore d:25.000 mm; Basic Static Radial Load Rating Co:13400 N; Width B:17.00 mm; Grease Speed Rating n1:9000 rpm; Oil Speed Rating n2:13000 rpm; Outside Diameter D1:62.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:24200 N;

D:1358.9 mm; r1,2 min.:4.8 mm; d1 ≈:1080 mm; Basic static load rating C0:81500 kN; Calculation factor e:0.31; Fatigue load limit Pu:4750 kN; Thrust factor K:1.83; T:800.1 mm; Basic dynamic load rating C:27500 kN; Calculation factor Y2:3.3;

P150°:44.5 kN; N1:23.813 mm; H:174.625 mm; Da:140 mm; R2:21.431 mm; Initial grease fill:87.885 g; Cap bolt recommended tightening torque:298.3 N·m; Housing:SAFS 516; End plug (suffix Y):EPR 8; P60°:138 kN;

Basic Dynamic Radial Load Rating C:17200 N; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:13200 N; Width B:15.00 mm; Fillet Radius ra:1.00 mm; Outside Diameter D1:68.0000 mm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:11000 rpm; Bore d:40.000 mm;

Da:76.2 mm; Recommended diameter for attachment bolts, mm G:10 mm; R1:21 mm; J6:98.5 mm; L:83 mm; J:116.5 mm; Rα:45 °; Limiting speed:1200 r/min; Db2:83 mm; Mass bearing unit:0.85 kg;

rs (min):5 mm; Grease:6710 kN; Oil:524.650 kN; with tapered bore:670 min-1; with cylindrical bore:530 min-1; D:520 mm; Dynamic (Cr):9 mm; Static (Cor):16.7 mm; d:340 mm; Pu:3280 kN;

Basic Static Radial Load Rating Co:208000 N; Bore d:75.000 mm; Width B:71.40 mm; Fillet Radius ra:2.00 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:187000 N; Oil Speed Rating n2:3600 rpm; Sealed Speed Rating n3:2600 rpm; Outside Diameter D1:160.0000 mm; Grease Speed Ratin

Comparative axial load rating CFa:275 kN; D:647.7 mm; Design variant/feature:TQI; d1 ≈:517 mm; D1 ≈:598 mm; Basic static load rating C0:15000 kN; Thrust factor K:1.82; Mass bearing:420 kg; Fatigue load limit Pu:1160 kN; Calculation factor Y0:2;

Lock nut:AN 38; Max. speed for Taconite seal:365 r/min; Da:339.999 mm; P150°:136 kN; N1:34.925 mm; Lock washer:W 38; PG:1/4 NPT; Stabilizing ring:SR-38-32; J min.:549.275 mm; Taconite seal (dc shaft position):TER 160;