DTS200 Common Rail Injector Test Bench
USD $4,000 - $4,200 /Set
Min.Order:1 Set
Taian Dongtai Machine Manufacturing Co., Ltd.
DTS200 Common Rail Injector Test Bench
EPS200 test bench is our latest independent researched special device to test the performance of high-pressure common rail injector, controlled by industrial computer, Windows operating system. The oil quantity is measured by sensor and displayed on computer screen (Electronic fuel delivery system). All data can be searched and saved. It adopt Servo motor can works with light voltage. The rail pressure can be adjusted automatically, and it also provide pressure overload protect. It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology,
steady performance, precise measurement and convenient operation.
>>>CHARACTERISTIC
1. Controlled by industrial computer in real time, Windows operating system.
2. Oil quantity is measured by sensor and displayed on 10.4 tactile LCD screen;
3. More than 400 kinds of injectors data can be searched and used.
4. Pulse and frequency of the injector can be adjusted.
5. Injection time can be set .
6.Protection function of short-circuit.
7.Precise measurement, easy operation, low noise.
>>>FUNCTION
1.Test injector brands:BOSCH, SIEMENS, DELPHI, DENSO.
2. Test 1 piece of injector.
3. Test the pre-injection of common rail injector.
4. Test the max. oil quantity of common rail injector.
5. Test the cranking oil quantity of common rail injector.
6. Test the back flow oil quantity of common rail injector.
7. Test the average oil quantity of common rail injector.
8. Test the seal performance of common rail injector.
9. Data can be searched and saved.
>>>TECHNICAL PARAMETER
1. Pulse width: 0.1~20ms
2. Continuous injection times: 0~1000
3. Fuel temperature: 40±2℃
4. Rail high pressure: 0~1600 bar
5. Test oil filtered precision: 5μ
6. Input power: AC 220V
7. Rotation speed: 0~3000RPM
8. Oil tank capacity:6L
9. Weight:150KG.
II, Step
A, Automatic measurement:
1, Click(Injector Model)choose the injector model which you want to test.
2, Click (F1) choose (A),Injector automatic measurement,
Clean cleaning
Lenk Seal Test
VL Full load test
LL Idle Test
3, Click (F2), Main motor starts,The system automatically reaches the set pressure,(Pressure)is for the
pressure display, Unit: Mpa. After the pressure is stable, it will automatically test the injector in order. Fuel-
injection quantity (Inject), Back to the oil(Return), automatic display and automatic contrast with the
Computer storage standard data. If the test results are satisfactory Automatically displayed in green
measuring cup, if not it show red . After the end of the measurement device automatically stops running.
Clean cleaning
Lenk Seal Test
VL Full load test
LL Idle Test
B, Manual measurement:
1, Click(Injector Model)choose the injector model which you want to test.
2,Click (F1)choose(M),choose the test steps as your request.
3,Click (F2), Main motor starts,The system automatically reaches the set pressure,(Pressure)is for the
pressure display, Unit: Mpa. After the pressure is stable, click (F4),Start Measurement. Fuel-injection quantity
(Inject), Back to the oil(Return)automatic display and automatic contrast with the Computer storage standard
data. If the test results are satisfactory Automatically displayed in green measuring cup, if not it show red . After
the measurement finish, Press (F3) equipment to stop running.
III,Speed set:
Click (Option), enter set interface,Click (Edit Speed) ,enter the interface of speed set, Choose the speed test
step of you want to change then click(Edit) set, set finished click(OK) save and quit.