Machining:No; Surface Treatment:No; Fit:J7; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Irregular Shape Flan; Grease Type:Standard Grease; Bearing Unit, Type:Irregular Shape Flan; RoHS:6; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Cylindrical Bore Set;

Shape:T-Shaped; Bearing Part Number:6002; Days to Ship:8 Days; Shape:T-Shaped; Thickness, Height Indication:T Selection, h Confi; RoHS:6; Type:Bearings with Housin; Number of Bearings:Double; Seals:VV (Non-Contact Rubb; C Chamfered:Provided;

Fit:J7; Surface Treatment:No; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Surface Treatment:No; Machining:No; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearing Unit; Seal:Silicone;

Dynamic Load Rating:4850 lbf; Center of Bearing from Bearing End S:20.1 mm; Housing Style:Two-Bolt Flange; Inside Ring Outside Diameter:1.720 in; Seal Type:Molded Shroud; Weight:2.262 lb; Flange Thickness A1:11.9 mm; Static Load Rating:2530 lbf; Dimension E:1.854 in; Housing Width A:29.9 mm;

k:66.5 mm; Locknut:KM 14; E:8 mm; S:8 mm; D1:70 mm; D5:98 mm; No. of Tangs:19; D4:85 mm; Weight:33 g; t:1.5 mm;

T min.:-20 °C; A1:16 mm; G:M6x1; s1:22.5 mm; L1:82 mm; H:161 mm; L:90 mm; B:27 mm; J:130 mm; d:28.58 mm;

Type:Bearings with Housin; Holder Surface Treatment:Not NSK tm305 Bearing Provided; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; RoHS:6; Shape:Bottom Mount; Bearing I.D. d(mm):10; Width T(mm):15;

Designation of housing:FE203N-; Recommended tightening torque for set screw:3.2 Nm; T max.:100 °C; Z:41.3 mm; Weight:0.42 kg; Dz:46 mm; Designation of bearing:US203-11G2T04; e:19 mm; A1:10 mm; T min.:-40 °C;

Bearing Unit, Type:Square flange shape; d:45; Grease Type:SH33M; Surface Treatment:No; Days to Ship:8 Days; Basic Load Rating, Dynamic Rating(N):48900; Stroke:No; Rolling Element Material:Bearing Steel; Diameter series symbol:For Heavy Load; Bearing Inner Dia. Shape:Cylindrical Bore Set;

D:140; Basic Load Rating, Dynamic Rating(N):143000; Outer Ring Type:Flat; Number of Raceway Ring Rows:Double Row; Number of Raceway Ring Rows:Double Row; Holder Symbol:No; Load Direction:Radial / Thrust; Seal, Shield:No; Retainer Type:No; Rolling Element Material:Steel;

Surface Treatment:No; Unit Body Material:Cast Iron; Unit Body Material:Cast Iron; Fit:J7; Bearing Unit, Type:Take-Up Type; Diameter series symbol:Medium Load; d:85; Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Seal:Triple seals;

Y - ISO Factor1:0.75; Design Units:Imperial; Da - Cup Frontface Backing Diameter:14.78 in; Series:114000; r - Cup Frontface To Clear Radius2:0.130 in; Cg - Geometry Factor7:0.157; K - Factor3:0.73; D:16.0000 in; C - Double Cup Width:5.0000 in; Y1 - ISO Factor5:0.85;

G2 - Heat Generation Factor (Rib-Roller End):11.5; K - Factor7:1.31; Cg - Geometry Factor:0.0694; a - Effective Center Location3:-1.5 mm; Y - ISO Factor9:1.35; e - ISO Factor8:0.44; R - Cone Backface To Clear Radius1:2.030 mm; Bearing Weight:0.30 Kg; Ab - Cage-Cone Frontface Clearance:2.3 mm; G1 - H

L1:29 mm; S:21.4 mm; T min.:-20 °C; H:53.9 mm; C0:20.8 kN; L:120 mm; d1:62 mm; H1:14 mm; Designation of bearing:EX209G2T20; A1:32 mm;

J:450 mm; Designation of bearing:UC324G2L3; Designation of housing:P324-; H2:320 mm; G:M10x1; s1:63 mm; L:570 mm; Recommended tightening torque for set screw:75 Nm; d:120 mm; L1:140 mm;