Common Rail Tools Common Rail Injector Test Instrument Tester Simulator

Germany imported PWM control chip CR-C multifunctional common rail fuel injector tester,can accurate imitation of ECU driving signal for each work condition. Injector,injection,such as pre discharge point,full load conditions.Can drive a variety of brands of injector.Bosch.Delphi.Denso common rail injector.

CR-C multifunctional common rail fuel injector tester

Using the simple operation,can meetthe detection of common rail injector combination and ordinary nozzle

Tester,To reduce the investment threshold of repair

Epuipment.The detector has the advantages fo small

Size and portability can provide customers the way

Detection and repair of common rail injector.can greatly improve work efficiency.

Instrument Parameter:

Model: CR-C multifunctional common rail fuel injector tester

Test Range: Atomization effect,Pre-spray,Emission point,Full load point.

Usage: Bosch,Denso,Delphi,Domestic and Normal injectors

Power Supply: AC110-240V

Work Temperature: -30C°~70C°

Size(L×W×H): 110mm×250mm×190mm

Adjustable pulse width: 10MS

Adjustable frequency:30Hz

Instructions

• Connect the common rail injector directly or into the holder to the high pressure tubing of a conventional hand pressure verifier.

• Select the appropriate plug according to the injector brand to properly connect the harness to the injector.

• According to the fuel injector brand, select the corresponding drive mode. At this time, you can hear the injector solenoid valve pick up the sound of the armature

• By providing a suitable injection pressure by continuously pressing the checker lever, the general pressure value is 30-40MPA, and the atomization performance of the injector can be observed.

• The fuel injection and oil return of the injector can be detected by an external measuring cylinder.

 Tai'an Junhui Automobile Maintenance Equipment Co.,Ltd is one professional enterprise on research,production,sales and service on frequency control fuel injection pump test bench and automobile electrical control & EFI detection equipments.

We mainly manufacture PTS series Diesel Fuel Injection Pump Test Bench, Common Rail Injector & Pump Test Bench, EDC Electric speed governing tester, EUI/EUP Test Bench,PDQ series Fuel Injector Test Bench,etc. We also design and produce different kinds modern testing equipments by client's requirements.

We acquired ISO 9001:2015 and CE certificate.There are Asia,Africa,Europe,Aemerica clients give high evaluation on our machines.

 1. OEM Manufacturing welcome: Product, Package.

2. Sample order

3. We will reply you for your inquiry in 24 hours.

4. after sending, we will track the products for you once every two days, until you get the products. When you got the

goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer

the solve way for you.