High Quality JH-EMC Fuel Injection Pump Test Bench
USD $3,000 - $3,000 /Set
Min.Order:1 Set
Taian Junhui Automobile Maintenance Equipment Co., Ltd.
2018 new product low price high quality diesel fuel injection pump test bench
12PSB Diesel Fuel Injection Pump Test Bench for Diesel Servicer workshop
High Quality and Lower Price 12PSB Diesel Fuel Injection Pump Calibration Test Bench
diesel fuel injection pump test bench diesel injector tester EPT-EMC
High Quality Diesel Fuel Injection Pump Test Bench for truck tractor and construction machinery
High Quality JH-EMC Fuel Injection Pump Test Bench
Characteristics
1.Variable frequency speed regulation;
2.Small deceleration and large output torque;
3.High measurement precision;
4.Overvoltage protection, overload protection and short-circuit protection;
5.Ten kinds of rotation speeds presetting;
6.Constant temperature control;
7.Ultra-low noise;
8.Two potentiometers respectively located at two sides of the bench, which is used for controlling speed without interfering;
9.Rotation speed, count and temperature are displayed in digit mode, and air pressure is displayed on the mechanical gauge;
10.Built-in air resource.
Function
1.Measuring each cylinder’s injected oil quantity at various rotation speeds;
2.Checking each cylinder’s injection time statically;
3.Checking the mechanical speed governor;
4.Checking the electromagnetic valve of distribution pumps;
5.Checking the pneumatic speed governor’s performance;
6.Checking the pressure compensator’s performance;
7.Measuring the returned oil quantity of distribution pumps;
8.Measuring the internal pressure of the distribution pump body;
9.Checking the pneumatic speed governor’ s vacuum performance;
10.Checking the sealing of fuel injection pump body.
Technical Parameters
1.Adjustable rotation speed range: | 0~4000RPM |
2.Double series of graduates: | 45cc and 1500cc (optional) |
3.Volume of oil tank: | 60L |
4.Temperature stabilization: | 40±2℃ |
5.Test oil filtering unit: | 5μ |
6.DC supply: | 12V/24V |
7.Fuel feed pressure: | low: 0~0.4MPa, high: 0~4Mpa |
8.Air pressure: | 0~0.3MPa, -0.03~0Mpa |
9.3-phase power supply: | 380V/50Hz or according to requirements |
10.Flywheel inertia’s moment: | 0.8KG·M2 |
11.Center height: | 125MM |
12.Output power: | 7.5KW, 11KW, 15KW or according to requirements |
13.Overall dimensions(MM): | 2360×960×1870 or according to requirements |
14.Net weight(KG): | 900kg |