CR360 mechanical pump test bench combined with common rail test system
USD $5,300 - $7,500 /Set
Min.Order:1 Set
Taian Junhui Automobile Maintenance Equipment Co., Ltd.
CR360 mechanical pump test bench
CR360 multifunctional test bench test for mechanical pump and common rail pump & injector, which is applied to BOSCH/DELPHI/DENSOSIEMENS etc brands,including piezo injector .It has two control system in the computer , It is drived by the original BOSCH common rail pump to produce 0-1600bar rail pressure. It adopts humanizing control interfaces to control the parameters of the oil pressure, pulse width, frequency and the scale valve duty cycle.
Technology characteristics
1.industrial computer,windows operating system,driven by Bosch pump;
2.real-time showing rail pressure with LCD;
3.the database can be queried ,stored,changed and generated a new database;
4.closed-loop control,it can automatically adjust the rail pressure,make it stable, and fluctuations not over +/-1Mpa;
5.the drive signal pulse width and frequency can be adjustable;
6.the number of injections and injection time can be set;
7.with overpressure protection,automatically shut down when rail pressure is more than 1600bar;
8.completely running-in of common rail pump and injector;
9.protective plexiglass door, the operation more safer,easily observation.
Function for mechanical pump:
1.Measurement of each cylinder’s delivery at various rotation speeds;
2.Checking of each cylinder’s injection time with static state;
3.Checking of the mechanical speed governors;
4.Checking of the electric magnetic valve of distributor pumps;
5.Checking performance of the pneumatic speed governors;
6.Checking of the pressure compensators (LDA) ;
7.Measurement of the reflux delivery of distributor pumps; (May selection)
8.Measurement of the internal pressure of the distributor pumps body.
9.Checking of the pneumatic speed governors’ vacuum performance; (May selection)
10.Measurement of rack travel; ( May selection)
11.Checking of the sealing of fuel injection pump body .
Function for common rail system:
1.test start injecting quantity of common rail injector;
2.test the biggest injection quantity of common rail injector;
3.test pre-injection quantity of common rail injector;
4.test return oil quantity of common rail injector;
5.test piezoelectric crystal common rail injector;
6.test the uniformity of common rail injector;
7.test solenoid valve of common rail pump;
8.test sealing performance of of common rail pump and injector;
9.test the supply oil quantity of common rail pump;
10.test the input pressure of common rail pump;
11.test performance of rail pressure sensor;
Technical parameters
1, Main motor speed | 0-4000 r / min can be adjustable. |
2, Motor power | 7.5KW, 11KW, 15KW, 18.5KW optional. |
3, Fuel Injector open voltage Control range | 12V, 80V, 150V Control accuracy: phase adjustment |
4, Injector opening frequency Control | 0-1000HZ Control accuracy: 1HZ |
5, Fuel Injector Hold Time Control | 0-65535us |
6 Delivery Oil CountControl Control accuracy | 0-1000 times 1 times |
7, Fuel pressure control Control Control accuracy | 0-2000bar 1bar |
8, Electronic power | 3 PHASE 380V or 3 PHASE 220V |
Taian Junhui Automobile Maintenance Equipment Co., Ltd is professionally engaged in the developing and manufacturing of diesel injection system testing equipment, such as fuel injection pump test bench, common rail test bench,HEUI tester, EUI/EUP tester. And It also distribut diesel fuel injection components, diagnostic equipment, the series of motive maintenance equipment.Always following the philosophy of ‘Reliable product quality and after-sales service are the most important two engines for the life of enterprise’.