Material: Carbon steel, stainless steel, alloy steel

Application

Large tie rod ripple compensator is suitable for steam, hot water and all kinds of non-corrosive media. Usually the diameter of the pipe is 50-2500mm. It is most suitable for overhead pipeline because of its transverse deformation characteristics, it must be installed in L and Z parts of pipeline. Usually there are two ways of installation: horizontal installation and vertical installation. The advantages of horizontal installation do not affect the drainage and self-flow, but the disadvantages are to increase the occupation area and land acquisition costs. Vertical installation usually does not increase the occupied area because the occupied space is parallel to the pipeline plane. The disadvantage is that the drainage device must be installed before the pipeline is raised. Increase the drainage of pipeline by waterproof strike.

Function or USE

Use the effective expansion and contraction deformation of bellows of its main body to absorb the size changes of pipelines, conduits, containers caused by thermal expansion and cold contraction, or compensate the axial, lateral and angular displacements of pipelines, conduits, containers, etc. It can also be used for noise reduction and vibration reduction. It is widely used in modern industry. In heating, in order to prevent pipeline deformation or damage caused by thermal elongation or thermal stress during heating, compensators need to be installed on the pipeline to compensate the thermal elongation of the pipeline, thereby reducing the stress of the pipe wall and the force acting on the valve or support structure.

Features and Advantages

Large compensation, no internal pressure thrust, small thrust to support, safety, no leakage, correct cold tightening, low cost and other advantages.