Product Details

Charcoal Ball Machine

Charcoal Ball Machine Introduction:

Charcoal Ball Machine is used for coal fines, ore fines, desulfurization gypsum, phosphor gypsum, coke fines, iron fines, mill scale, fluorite power, manganese ore fine sand other material fines into briquette, which can be made to round ball shape, oval shape, pillow shape, square shape and so on,or can be manufacture as customer requirement.

This machine is widely used in refratory industry,coal industry,andmetallurgy industry.Charcoal Ball Machine, the main rollers adopt high-quality manganese steel materials(65Mn/9Cr2Mo), greatly improving the wear resistance and pressure ability, make the machine has a long service life, has been widely used in recent years.

Charcoal Ball Machine Notice:
(1)The particle size of raw material should be between 0-5mm.
(2)Charcoal Ball Machine feeding material can not contain impurities, especially large metal. such as nails, or iron bolts and nuts, rocks, etc. it is easy to damage roller and spindle.
(3)The feeding speed of whole production line should be stable, even, and make sure workloads is also stable so as to get high efficiency of production.

Charcoal Ball Machine Production Line Work-flow:
The Charcoal Ball Machine production line generally includes raw material batching, grinding and mixing, briquetting and drying.

(1)The different kinds of raw material is evenly mixed by batching machine in the first step.

(2) These machine goes into wheel grinding mixer or double shaft mixer machine to further mixing, at this moment, the binder material will be put into together.

(3) The mixture material will enter into Charcoal Ball Machine, and discharged various briquette shape according to customer requirement.

(4)Because the fresh briquette contents moisture, couldn’t be used directly. The mesh belt dryer or chain belt dryer, as well as vertical dryer will give them completely drying process. The final dried briquette can be smelted,transported or heating directly.

Charcoal Ball Machine Technical Parameter:

XM Series Coal Briquetting Machine

Model	Reducer	Ratio	Roller Size(mm)	Main Shaft Speed(r/min)	Matched Power(kw)	Capacity(t/h)	Pressure Type
XM290	ZQ350	1:31.5	290*200	12-14	5.5	0.9-1.0	Constant Pressure
XM360	ZQ350	1:31.5	360*250	12-14	7.5	1.5-2.0	Constant Pressure/Hydraulic Pressure
XM400	ZQ400	1:31.5	400*250	12-14	7.5	2.5-3.5
XM430	ZQ400	1:31.5	430*250	12-14	11	3.5-4.5
XM500	ZQ650	40.17	500*470	10-12	37	7.5-8.5
XM650	ZQ850	40.17	650*470	9-11	45	9-10
XM750	ZQ1000	40.17	750*570	9-11	90	13-14
XM850	ZQ1250	50	850*570	8-10	110	15-17
Remarks: Above capacity is based on material specific gravity 0.8, briquette size: φ50*33mm
Roller material is 65Mn, high chrome alloy and 9Cr2Mo
According to different material adjust machine parameter to meet customer production

KF Series Mineral Powder Briquetting Machine

Model	Reducer	Ratio	Roller Size	Main Shaft Speed(r/min)	Matched Power(kw)	Capacity(t/h)	Pressure Type
KF500-371-280	ZQ500	40.17	370*280	8-10	11	6.5-7.5	Constant Pressure/Hydraulic Pressure
KF650-500-300	ZQ650	40.17	500*300	8-10	37	8.5-9.5
KF850-650-300	ZQ850	40.17	650*300	8-10	55	10.5-11.5
KF1250-750-350	ZS1250	50	750*350	7-9	110	13.5-14.0
KF1450-850-350	ZS1450	50	850*350	7-9	132	15.0-16.0
KF560-1000-350	ZSY560	50	1000*350	7-9	150	17.0-20.0
Remarks: Above Capacity is based on material specific gravity 2, briquette size:φ50*33mm
Roller material is 65Mn, high chrome alloy and 9Cr2Mo.
According to different material adjust machine parameter to mmet customer production

YHG Series Dry Powder High Pressure Briquetting Machine

Model	YHG-0.5	YHG-1.5	YHG-3.0	YHG-5.0	YHG-8.0	YHG-10.0
Roller Diameter(mm)	φ299	φ367	φ522	φ738	φ760	φ858
Roller Width(mm)	180	183	196	210	225	300
Capacity(t/h)	0.5	1.2-1.4	2.5-3.0	4.5-5.5	7.5-8.5	8.0-9.5
Main Reducer	ZQ650	ZQ850	ZS1250	ZS1450	ZS1650	ZS1650
Main Motor	18.5	37	55	75	90-110	110-132
Pre-pressure Motor(kw)	7.5	11	15	18.5	18.5	22
Pre-pressure Reducer	WHC-125	WHC-160	WHC-200	WHC-210	WHC-210	WHC-250
Remarks: Above capacity is based on material specific gravity 1.3, briquette size: φ353020mm
Roller material adopts 9Cr2Mo
Pre-pressure motor is speed motor