The light incubator of kenton instrument is suitable for seed germination, seedling cultivation, culture and preservation of bacteria and microorganisms. It is an ideal environmental test equipment for the scientific research departments of biology, medicine, agriculture and animal husbandry, forestry and environmental science.

Working principle

The working principle of Artificial climate chamber is to feel the actual temperature and humidity, then convert into electrical signals through temperature and humidity sensor ,At the same time can be preset light intensity and electrical signals,under the microcomputer control(heater or humidifier,The Lamp quantity or refrigeration compressor ), to achieve the required temperature ,humidity and illumination 

Run Preparation

Before the initial operation of this machine, please follow procedures as below:

1. Take out the shelves and other accessories inside the chamber.

2. Use gauze with soaked alcohol to wipe the cabinet to disinfection, then using a dry gauze to wipe the alcohol.

3. Put the shelves inside equipment according to the experimental requirements.

4. water tank should be placed on the top of the equipment, then insert pipes to water inlet and overflow in the chamber back (refer to the parts diagram), and place water basin for use under the overflow port.

5. inject enough pure water into the water tank.

E-mail: kenton@kentonchina.com

After-sales: service@kentonchina.com

Lighting incubator:

/light-chamber/20170602/36.html