Energy saving kitchen adjustable gas grill control valves
USD $2 - $5 /Piece
Min.Order:100 Pieces
Ningbo Fenghua Gogo Automatic Trading Company Limited
Energy saving kitchen adjustable gas grill control valves
Specification
Media | gas, methane, diesel oil |
Medium Temperature | -10°C~80°C |
Pressure | 0.0~0.4Mpa |
Material | brass |
Port size | 1/4″~ 1″ |
Orifice | DN6 |
Seal | NBR, VITON |
Used for boiler and gas system,with manual override.
Gas Solenoid Valve
Characteristic: 1.Direct lifting diaphragm construction with high frequency
2.Manual override to adjust the flow rate when closed
3.Applied to boiler system
Medium : Civil gas
Temperature: NBR Seal: 14F to 176F , -10 to 80
EPDM Seal: 14F to 250F , -10 to 120
VITON Seal : 14F to 300F, -10 to 150
Pressure: DHD61: 0.0MPa ~ 0.2MPa
Port Size: 1/4"
Port Thread: BSPP ,BSPT ,NPT
Orifice (mm): 6
Voltage: DC - 12V,24V
AC - 24V,120V, 240V@60HZ 110V, 220V@50HZ
Tolerance: +/- 10%
Coils : S91B, 14VA(AC), 10W(DC), IP65,100%ED
NASS COIL 0543 on request
Material: Body - Brass
Seal -VITON,NBR,EPDM
Armature Tube - Stainless Steel 304
Plunger - Stainless Steel 430F
Stop -SS430F
Springs - SS 304
Shading Rings - Stainless Steel 304
Port Size | Orifice | Cv | Min Pressure | Max Pressure | Seals Material | Body Material | |
AC(40VA) | DC(30W) | ||||||
1/4" | 6 | 4.8 | 0.0MPa | 0.2MPa | 0.2MPa | NBR | Brass |
Port Size | Orifice | Cv | Min Pressure | Max Pressure | Seals Material | Body Material | |
AC(40VA) | DC(30W) | ||||||
3/4" | 20 | 7.6 | 0.0MPa | 0.4MPa | 0.4MPa | NBR | Brass |
Features
Founded in July,2014,Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality , potential and comprehensive strength .The company is located in the Zhejiang Ningbo Science &Technology zone ,a unique place with beautiful scenery and gifts of nature.
On the basis of technology development , the company has taken in a group of experienced personnels who are talented in senior management ,marketing and skills of producing .In the company ,great attention is paid to basic management ,stable quality ,continuously improving pre-sale services,sale and after-sale services,and enhancing the market competitiveness of our products.
Main products of our company : automatic parts, pneumatic solenoid valve , air water solenoid valve, hydraulic valves, gear piston or vane pumps , fittings connectors , temperature pressure transmitter , temperature controller , PLC , DCS parts , hardware stainless steel or brass or plastic parts , etc.
1 years warranty
Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc
Packaging & Shipping
1:Inner packing: opp bag, then carton box for each product.
2:Outer packing: export standard carton, Foam outside protecting the goods against damage
1: Usually we ship your order by sea or by air...
2: We do our best to ship your order within 1 week after receiving your payment
3: We'll tell you the tracking number once your order has been sent.
4: We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal.