MIT-20
USD $6 - $8 /Kilogram
Min.Order:100 Kilograms
Sinotrust International Trade Co. Ltd
MIT-20 CAS 2682-20-4
In-Can Preservation for Paints, Adhesives and Related Products
Chemical Name: 2-methyl-4-ishothiazolin-3-one
CAS No: 2682-20-4
General:
MIT-20 is an active ingredient solution for the preservation of paints, binder dispersions, adhesives and other technical products.
MIT-20 contains an active substance permitted for use in food contact coatings and adhesives provided that the customary dosage rates are not exceeded.
MIT-20 is a straight aqueous solution of the active ingredient Methylisothiazolone, and does not contribute to VOC and AOX. the Performance of MIT-20 is similar to ACTICIDE® M 20.
Specification:
ITEM | Specification |
Appearance | Yellowish transparent liquid |
Content o active substace % | ≥20 |
PH Value | 4.0-6.0 |
Density g/ml | ≥1.02 |
Application and Activity
MIT-20 combines environmental acceptability with effective preservation. It can be used in a wide range of products such as paints, adhesives, latex emulsions, tackifiers, mineral slurries, pigment dispersions and other technical, water-based products.
MIT-20 is a straight solution of the active ingredient in water and does not contain any additives or salt. It is therefore suited to preserve products which are free of VOC(volatile organic compounds) and AOX (adsorbable, halogenated organic substances). In most cases it shows a very good compatibility and will not cause coagulation even if added undiluted.
MIT-20 has a broad spectrum of activity against all commonly occurring micro-organisms in the application field. It must be understood that MIT-20 cannot provide a protection in the vapor phase due to absence of formaldehyde and other volatile microbicides. Therefore, appropriate hygienic measures should be followed during paint.
Dosage
The optimum dosage rate of MIT-20 depends upon the degree of contamination and the susceptibility of the product to be preserved. Occasionally, the degree of contamination exhibits seasonal fluctuation, so that a periodical determination of germ counts can assist in choosing the optimum dosage rate.
The typical use concentration ranges between 0.05 – 0.15%.In the case of special application, please consult either our Technical or our Biological Laboratories for assistance.
Package:
1000 kg per IBC drum, 200 kg per drum. 25kg per plastic drum.
Storage and Transportation:
To be stored at room temperature in a dark place; with a shelf time of one year