Product Details

Spherical Bearings

Model	Model	Bolt	d	a	i	e	W.T
UCF201	UC201	M10	12	86	25.5	64	0.67
UCF202	UC202	M10	15	86	25.5	64	0.66
UCF203	UC203	M10	17	86	25.5	64	0.64
UCF204	UC204	M10	20	86	25.5	64	0.62
UCF205	UC205	M10	25	95	27	70	0.83
UCF206	UC206	M10	30	108	31	83	1.14
UCF207	UC207	M12	35	117	34	92	1.47
UCF208	UC208	M14	40	130	36	102	2
UCF209	UC209	M14	45	137	38	105	2.4
UCF210	UC210	M16	50	143	40	111	2.6
UCF211	UC211	M16	55	162	43	130	3.6
UCF212	UC212	M16	60	175	48	143	4.8
UCF213	UC213	M20	65	187	50	149	5.8
UCF214	UC214	M20	70	193	54	152	6.6
UCF215	UC215	M20	75	200	56	159	7.7
UCF216	UC216	M20	80	208	58	165	8.2
UCF217	UC217	M20	85	220	63	175	9.6
UCF218	UC218	M22	90	235	68	187	12.1

The outer spherical ball bearing is actually a variant of the deep groove ball bearing. Its characteristic is that its outer ring outer diameter surface is spherical, which can be fitted into the corresponding concave spherical surface of the bearing seat to play the role of centering. The outer spherical bearing is mainly used to bear the radial and axial combined load mainly based on radial load, and generally it is not suitable to bear the axial load alone. Its basic performance is similar to that of deep groove ball bearings, but since such bearings are mostly used in relatively rough machines, the installation positioning is not accurate enough, the axial alignment of the shaft and the seat hole is poor, and the accuracy of the bearing itself is not high enough. Some structures are also rough, so the actual performance of the performance is lower than the deep groove ball bearings of the same specifications. Such bearings can be fitted with inner and outer rings, respectively. The outer spherical bearing is a bearing unit that combines a rolling bearing with a bearing housing. Most of the outer spherical bearings are made of a spherical surface and are mounted together with a bearing housing with a spherical inner hole. The structure is various, and the versatility and interchangeability are good. At the same time, these bearings are also designed with a certain degree of self-alignment, easy to install, and have a double-structured sealing device that can work in harsh environments. The bearing housing is typically cast. Commonly used seats are vertical seat (P), square seat (F), boss square seat (FS), boss circular seat (FC), diamond seat (FL), ring seat (C), slider seat（T)etc.

Address: No. 24, Lane 397, Huhang Road, Fengxian District, Shanghai, China

Email：bearing@anshu-electromech.com Mobile phone:(0086)013918253057

Tel：（0086）021-60140720 wechate:ch13918253057

Fax：（0086）021-35090027 QQ：810480122

WhatsApp:+8613918253057 Skype:chpfchpf