Name: cr-c common rail tester + s60h nozzle tester
Brand: cr-c common rail tester + s60h nozzle tester
Availability: InStock

Product Details

cr-c common rail tester + s60h nozzle tester

Package list for CR-C :

1. CR-C Main Unit Machine * 1pcs

2. Main Test Cable * 1pcs

3. For Bos-ch Connector *1pcs

4. For Del-phi Connector * 1pcs

5. For Den-so Connector * 1pcs

6. Cable Clip connector* 1pcs

7. Fuse * 3pcs

Package list for S60H :

1. Main Machine * 1pcs

2. Fuel Bar * 3pcs

3. Accessories * 1sets

4. Manual * 1

Parameters:

Produce Model: CR-C Common Rail Injector Tester

Testing Range: atomization, pilot, emission and full load condition.

Test Injectors: for bos-ch, for Den-so, and for Del-phi common rail injectors.

Power Supply: AC220V

Working Temperature: -30C°-70C°

Size: 110*250*190mm

Adjustable Width: 10 MS

S60H Common rail diesel nozzle validator tool :

Diesel Injector Nozzle Pop Tester fuel injector nozzle tester with 0 – 400 BAR / 0 – 6000 PSI

Dual Scale Gauge BOSCH injector checker is suitable for all common rail injector and mechanical

injectors, auxiliary products have compression release valve, it can check the fuel injection conditions

of various types of injector quickly and easily. It also can be used with common rail injector 118 solenoid

valve tester to test various types of common rail injectors. The injector checker equipped with two

different types of tubing. You can freely switch suitable for detecting the injector, it is a good choice t

o Initial inspection injector working state.

How to make the test:

As we know driver common rail injector , not only need a tester but also need high pressure fuel,

so use a manual fuel pressure pump S60H as show the pictures

The high pressure oil common rail injector directly or into the holder is connected to the common hand pressure calibrator.

According to the corresponding plug injector brand choice, will harness and injector connected up correctly.

According to the fuel injector brand, drive mode selecting corresponding, at this time can hear the injector solenoid valve suction armature “Pa, Pa” voice.

By constantly under pressure calibrator lever, provide the suitable injection pressure,

the general pressure value takes 30-40MPA best, at this time can be observed on the fuel injector atomization performance.

Through the external cylinder, can be detected on the injector fuel injection quantity and oil return.

The product cover these both products.

Note : Kindly note CR-C common rail injector tester is only for electromagnetic injector, it is not with piezo function,

if you need buy more professional device which covers electromagnetic injector,and also covers piezo injector contact us.

Our majored products are Head Rotor(VE Pump Parts) , LUCAS DPA , pump head (VE pump head), nozzle, plunger, valve, injector, common rail system’s accessories. What is more,we are attention to our construction of brand value. From the beginning of 2011 we create and own brand "DICSCL PARCS" to provide credit protection to customers.