HIGH SPEED STRAIGHTENING & CUTTING MACHINE

Double Wire Straightening Cutting Machine Manufacturer

Double Wire Straightening Cutting Machine Supplier

HIGH SPEED STRAIGHTENING & CUTTING MACHINE use the high speed rotating spinner to make straightening. This machine make straight bar from coil in high efficiency.

STRAIGHTENING & CUTTING MACHINE PRINCIPLE

1.CENTRAL MACHINE

2.WIRE PAYOFF

Maximum carrying capacity 2,000Kg.
Equipped with wire guide and safety funnel
Equipped with 1set of vertical payoff and 1set of guide funnel3. WIRE INLET FEED UNIT

Two independent incoming towing devices.
Each device is made up of two pulleys whose aim is to feed the wire toward to the rotating unit.
The pulley is equipped with two races whose profile depends on the shape and dimensions of the wire to be processed.
The upper pulley pressure is adjusted by screw and pneumatic clamping.

4.STRAIGHTENING ROTATING BODY

The most important component of the machine.
There are five couples of dies inside the body. The machine is normally supplied with two types dies (standard cast-iron dies) for the process of the small and large wires.

5.WIRE OUTLET FEED UNIT

Out-feed unit  is made up of two pulleys whose aim is to drag the wire from the rotating unit to the cutting unit.

The pulley is equipped with two races whose profile depends on the shape and dimensions of the wire to be processed.

The upper pulley pressure is adjusted by screw and pneumatic clamping.

The cut unit is made up of an arm within which there is cutting knife, moved by an independent servo-motor operating on a can cutting the wire to the required length.

6.CUTTING UNIT& COLLECTING BENCH

12m collecting bench with preselecting rod counter (buffering device) and collecting pocket.

The cutting control device (length measuring) is mounted in the frame. Any required length between 1,000-12,000mm can be setup manually.

7.ELECTRIC CABINET AND CONTROL CONSOLE

Siemens electric cabinet
Button and touchable screen coordinated operation system