Product Details

545 Pipe Thread Locking sealant (Same as henkel loctite 554)

Technical data sheet

Product model	Container (ml)	color	Viscosity (Mpa.s)	Screw (mm)	sealing pressure (Mpa)	temperature range (℃)	fixture time/full cure time
545	50ml/250	purple	14000	M36	69	-50~150	40min/24hrs
554	50ml/250	red	2500	M80	69	-50~150	40min/24hrs
567	50ml/250	white	55000	M80	69	-50~200	20min/24hrs
568	50ml/250	yellowish	400	M36	69	-50~150	20min/24hrs
569	50ml/250	brown	400	M36	69	-50~150	30min/24hrs
577	50ml/250	yellow	24000	M80	69	-50~150	20min/12hrs

545 Piping thread sealant features:

Hydraulic and pneumatic sealant.

Low strength, fast curing. Used for the sealing and locking of high pressure hydraulic system and taper thread below M36.

It won’t contaminate hydraulic system, and can be used on surface with light oil stain.

It contains no filing, and blocks no valves and filtering systems.

Use and storage:

1) Oil removal, clean and dry on the thread surface.

2) The thread standard (clearance, thread, screwing in more than 5 threads).Drop the glue in the external thread, the first thread can't glue, glue above 3 threads, screw in the tightening of specified torque, or the specified direction.

3) Fully cured by 24 hours, cure slowly below 15 ℃ and on inactive surface, use 7649 to accelerate curing.

4) Usually assembled with hand tools, 2 inches parts can be heated to 260 ℃ to remove.

Note: Should not be used on plastic, cannot be used for pure oxygen and rich oxygen sealing system.Tube need to keep enough oxygen to keep it liquid.

Contact Information: