Waste Incineration Environmental Protection Equipment
USD $1000 - $20000 /Set
Min.Order:1 Set
Lianyungang Boyun Machinery Co., Ltd.
Type | FilterArea(m2) | Disk number Plate number (a) | Filter Plate Diameter (mm) | Main size(L*W*H) | Weight (KG) | Installed Power (kw) |
BY-45 | 45 | 15/12 | 1920 | 7300×3200×2580 | 12000 | 27.55 |
BY-60 | 60 | 15/12 | 2060 | 7440×3260×2885 | 20100 | 37.5 |
BY-80 | 80 | 16/12 | 2100 | 7600×3260×3060 | 28000 | 48.5 |
BY-120 | 120 | 24/12 | 2100 | 10000×3260×3060 | 36000 | 48.5 |
BY-150 | 150 | 80/12 | 2100 | 11800×3260×3060 | 42000 | 48.5 |
SELLING POINTS
• Energy saving and high efficiency, higher processing capacity;
• Automatic control, automatic feeding, automatic cleaning, highly automation, lower labor cost;
• Perfect automatic protection function: with automatic fault alarm system, fault screen display function, high and low liquid level display, and automatic removal or shut down manual processing;
• Firmly and durable structure: more than 10 years service life;
• Higher quality of products and lower cost of transportation;
• Obvious environmental protection effect: reusable, reduction of emissions,
conforming to current trend of clean production and environmental protection;
Dewatering filtration of rubbish(garbage/waste/refuse) incineration
Rubbish after incineration, the obtained dust is transported to a huge storage tank, and then batched into the mixing tank of the water washing workshop to stir.Then it is transported to multiple ceramic filters for multi-stage filtration, which can reduce harmful substances by 20% each time. At this time, the material and water are separated. The filtered material can be used as raw material of cement plant, and the filtrate containing harmful substances is transported to steam tank for treatment.
The advantages of ceramic filters are as follows:
First, the power consumption is low, the power is only 12-20KW per hour, and the energy consumption is low.
Second, the filtered material is dry, the moisture content is about 10%, and the product has no loss, reaches 100% recovery.
Third, fully automatic control, can achieve one person to guard multiple devices or directly access the control center to achieve unattended.
Fourth, the liquid produced by the equipment is clear as pure water, and can be used directly as a production water source, which can achieve 90% water source recovery, greatly reducing the water consumption of the factory.
Key words:
Dewatering filtration of rubbish(garbage/waste/refuse) incineration
Slurry/residue/sludge treatment after rubbish(garbage/waste/refuse) incineration
Dust/ash and water separation after rubbish(garbage/waste/refuse) incineration
Centrifuge replacement/substitutes
Waste incineration environmental protection equipment
Dewatering equipment after domestic garbage incineration
solid-liquid separation equipment for waste incineration
Lianyungang Boyun Machinery Co., Ltd. is a professional manufacturer of mineral machinery, specialized in the design, research & development, manufacture & sales. We have owned 60 products including feeding, cracked, transportation, ore grinding, classification, flotation, concentration, drilling & magnetic separation. Those are widely used in mines, drilling and engineering construction.
Boyun is located in Donghai County, Lianyungang City. There are 10 engineers & 100 staff members more or less. Boyun pays much attention to product quality, and actively follows ISO9001 standards. We have many advanced performance test equipment and continuously make improvements to our quality assurance system. Quality service is considered as an important part of our product quality, and we honor our commitments we make before and after sales. We take seriously on every machine production so that we make sure it meets demand of our customers. Besides, we also can supply our customers mineral separation program design, mineral separation technological process design and standard & non-standard design. Donghai has beautiful scenery and beaches, convenient transportation that included harbors, an airport, railroads, and highways.
Welcome friends all over the world to visit our factory.
FAQ
Q1:Could you provide OEM service?
Yes, we have strong R&D capacity and technical support to customize the products according to customer’s requirements.
Q2:What about the payment term?
We can accept T/T, Western Union, Paypal.
Q3:Could you provide samples?
Yes.
Q4:Do you provide the technical support?
Yes, we have a experienced technical team to provide the pre-sales and after-sales supporting.
Q5:How does your factory do regarding quality control?
We have professional QC team and test equipments to ensure the quality.