SUNBEARING Pillow Block Bearing UCF309 Green 45*160*60mm Chrome Steel GCR15
USD $22.14 - $25 /Piece
Min.Order:1 Piece
Sheng Yao Wang (Dalian) International Trade Co., Ltd.
SUNBEARING Pillow Block Bearing UCFB205 Green 25*116*34.1mm Chrome Steel GCR15
SUNBEARING Pillow Block Bearing UCPH209 Green 45*105*190mm Chrome Steel GCR15
SUNBEARING Pillow Block Bearing UFL004 Grey 20*90*22mm Chrome Steel GCR15
SUNBEARING Pillow Block Bearing UFL000 Grey 10*60*36mm Chrome Steel GCR15
SUNBEARING Pillow Block Bearing UCFL203 Blue 17*113*31mm Chrome Steel GCR15
SUNBEARING Pillow Block Bearing UCF315 Grey 75*236*82mm Chrome Steel GCR15
Product Description
Product Name | Pillow Block Bearing UCF309 | ||
Structure | Pillow block Bearing | Seals | Rubber Seal |
Bore Size | 45mm | Bore Type | Round |
Outside Diameter | 160mm | Duty Type | Medium Duty, Heavy Duty and Others |
Width | 60mm | Operating Temperature Range: | -20 to +120°C |
Material | Plastic;Chrome Steel , Carbon Steel , Stainless Steel | Lubrication Type: | Oil; Grease; |
Cage | GCR 15, Stainless steel etc. | Series: | UCF |
Certificate | ISO9001:2008 | Features | It is suitable for high loads and speeds, also in case of alternating direction. |
Colour | Green | Bearing Structure | Spherical Surface Ball Bearing |
The Number Of Row | Single | Weight | 3.5kgs |
Clearance | C2 C0 C3 C4 C5 | Tolerance | ABEC1 ABEC3 ABEC5 ABEC7 |
Pillow block bearing is combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.
The outer surface of the bearing and the internal surface of the housing is spherical, so that the unit is self-aligning. The inside construction of ball bearing for the unit is such that steel balls and retainers of the same type as in series 62 and 63 of the deep groove ball bearing are used. A duplex seal consisting of a combination of an oil-proof synthetic rubber seal and a slinger is provided on both sides.
Depending on the type, the following methods of fitting to the shaft are employed:
(1) The inner ring is fastened onto the shaft in two places by set screws.
(2) The inner ring has a tapered bore and is fitted to the shaft by means of an adapter.
(3) In the eccentric locking collar system the inner ring is fastened to the shaft by means of eccentric grooves provided at the side of the inner ring and on the collar.