ST149 automatic oil oxidation stability tester is designed and manufactured strictly according to the GB/T21121-2007 animal and plant oil oxidation stability measurement (accelerated oxidation test), the single chip microcomputer control, the liquid crystal LCD display, the automatic output result, the automatic printing.

   During the determination of OSI (Oxidative Stability Index), the hot air at a certain temperature was put into the oil sample to accelerate the oxidation of glycerol fatty acid to produce volatile organic acid. The air brings volatile organic acids into a conductive chamber, where water dissolves the volatile organic acid and ionizes the ions, thus changing the conductivity of the water. The electrical conductivity of the conductive chamber is continuously measured by computer. When the conductivity increases sharply, Indicates the arrival of the end of the induction period, before which time becomes the OSI time

 GB/T21121-2007  Determination of oxidative stability of animal and vegetable oils and fats (accelerated oxidation test)

ISO 6886 Determination of oxidative stability of animal and vegetable oils and fats (accelerated oxidation test)

2.4.28.2-93  Stability Test of Natural Oxidation of Fat(Japam)

Technical characteristic

Special flow pump, accurate flow control and constant flow rate.

Real-time display of conductivity data

Unit of work: two tubes

Result processing: automatic measurement, storage, printing, calculation

Screen display:7-inch touch screen

Parameter

1.Heating mode: electric heating rod

2.Gas source: special flow pump 10L/H

3.Test time: 14 hours (different sample have different time )

4.Working temperature: normal temperature ~ 150 ±0.1 ℃

5.power:220V±10% 50Hz