Product Details

SDZ-30S pneumatic mountain geophysical drilling rig

1. Brief introduction of SDZ-30S pneumatic mountain geophysical drilling rig

SDZ-30 pneumatic mountain drilling rig has a optimization design and is a cost-effective product with great value. The SDZ-30S pneumatic mountain drilling rig can meet the construction requirements of air shock drilling and so on; so it can adapt to different geological environments. The SDZ-30S pneumatic mountain drilling rig geophysical drilling rig is now widely used in the mountainous, jungle, hills, gobi, loess plateeu, seasonal farmland and other complex areas without water source, such as oil and gas seismic exploration, field investigation, geological structure investigation and other drilling engineering construction work.

2. Features of SDZ-30S pneumatic mountain geophysical drilling rig

· Light weight modular design is adopted for quick disassemble and assemble for easy handling.

· The drilling rig and drill frame are strengthened and reinforced, which are more earthquake resistant and longer lasting.

· The front end of the base is designed with two sets of screw support, and the drill rig is more stable when drilling.

· Adopt a new and optimized hydraulic system, with higher efficiency and better control.

· The hydraulic oil tank is made by sheet metal process to reduce weld seam and use oil leakage for a long time.

· Lengthening the tubing between the hydraulic pump station and the operation table can achieve 3 meters outside operation.

· The screw type air compressor has the advantages of low energy consumption, low noise, high quality, stable exhaust pressure and low failure rate.

3.Technical parameters of SDZ-30S pneumatic mountain geophysical drilling rig

SDZ-30S pneumatic mountain geophysical drilling rig specifications
Capability	Drilling mode		air shock drilling
	Borehole diameter	mm	76
	Drilling depth	m	30
	Drilling pipe diameter	mm	60*1500
	Stroke	mm	1850
Hydraulic pump	Gasoline engine power	hp	35
	Rated pressure	mpa	20
	Rated flow rate	l/min	60
Power	Torque	n.m	1000
Power	Rotating speed	r/min	0-140
Lifting system	Rated pressure	kn	7.5
	Rated lifting power	kn	15
	Speed of lifting	m/s	0.77
Screw air compressor	Gasoline engine power	hp	35
	Displacement	m3/min	35
	Discharge pressure	mpa	0.8

4.Configuration list of SDZ-30S pneumatic mountain geophysical drilling rig

Base assembly	set	1	It includes chassis, leg and ball screw support
Drill stand assembly	set	1	It includes diagonal member, mast, chain wheel, chain, lifting motor, rotary motor and intake hole
Power of pump station assembly	set	1	It includes frames, engines, belt pulley and belts
Pump station assembly	set	1	It includes frame, hydraulic oil pump, hydraulic oil tank, hydraulic oil pipe and radiator.
Hydraulic oil tube	set	1	It includes hydraulic oil tube and connector
Operating station	set	1	It includes frame, balance valve, control valve, operating handle and throttle valve
Air compressor power assembly	set	1	Contains frames, engines, pulleys, belts
Screw air compressor	set	1	It includes frame, air compressor and radiator
Conveyor belts	plate	1	It is used to connect air compressor and drilling rig.
60 drill pipe	m	30	1.5m/pc
Impactor	branch	1	70
Impact bit	per	1	76

In the process of product updating, the above parameters and configuration are subject to change without notice.