Power supply safety: after 3000V short-term high voltage and leakage-proof safety test;

When a client consulted us in the morning, he asked a more intuitive question. The massager he bought exploded. How could such a serious problem be detected by safety regulations? It is understood that the power supply of the massager is overloaded, and the capacitance inside is exploded. Fortunately, there is no fire or injury. Then, I asked the customer to take a picture to show me the reasons for the photo, the result is that the power source uses non-standard reasons.

Massage products, whether they are adapter power supply or motherboard components, are subject to a 3000V short-term high voltage withstand test in factories and spot checks, that is to test whether there will be adverse conditions or cause explosion and combustion safety problems in short-term high voltage. If the raw material power supply of massager is not jerry-built, it is impossible to have short-circuit and explosion problems under normal circumstances without deception.

At present, the massage market is a dead sea of mixed fishes and dragons. In order to survive all kinds of fraud, many manufacturers intentionally reduce the safety standards and product quality of massage products to impact the market. As far as the power supply of massager is concerned, the price on the Internet is varied, cheap 4 yuan RMB and expensive 20 yuan RMB. It seems difficult to distinguish which manufacturer is good and which power supply is good. Qirui Massage Company has a quality of 6 years, and there are no unknown pits.

Qirui massager is to be confirmed after inspection and test in every link of raw material purchase and accessory entering factory. And each massager must withstand 3000V short-term high voltage capability test, whether in production mode or sampling mode, products and power supply must not have any abnormal phenomenon on-site record inspection confirmation. Inspection records show that Qirui massager is executed according to quality management system in all procedures. In some purchasing links, Wang inspected the original contract of the purchasing department in the factory, and confirmed the purchase of power supply in particular, so as to distinguish it from most of the fraudulent industry behaviors of massager manufacturers in the current market and the power supply of massager. It is an important accessory, directly related to the strength and noise of massager.

Core advantages

1）We export to 23 countries and regions

2）Special product can be order with one pcs.

3）adhere to the use of environmentally friendly energy-saving materials

4）Quality Supervision Institution Testing and Certification Guarantees Safety

5）6 years insisting on the production of quality

6）85% of the business comes from the referral of old customers

7）2535 customers serving no quality complaints for 5 consecutive years

8）management systems certificated by Medical Device Quality Management System. We can trace down to the responsible persons even for the tiniest details

Fu An Qi Rui massager features:

1.we only want to serve the distinguished 20% of the market share

Only serve for the 20% esteemed customers

2.95 % of the customers order on payment never meet with us

3.Qirui is not a small workshop. We have a 500 square meters office

4.5 years senior membership of Alibaba Gold Supplier of domestic trade which is featured with price transparency no hidden costs

5.We are a enterprise that participates in charitable and voluntary activities to give back to the society and fulfill our social responsibility

6.Self-owned R&D team, more than half of the R&D staff have been working on R&D for more than 10 years

7.Adopting the only intelligent automatic CNC machining center in Fu'an, the whole production line has almost no manual labor

Technical performance

1.The use of high-precision, high-hardness synchronous gear, imported DuPont POM achieving level 5 of material accuracy, the tooth surface is more wear-resistant, thus improving the life of the massager, but also effectively reduce the noise

2.Low vibration: Although the rotor has been precision machined, it has become in equilibrium. However, it is still balanced by high-precision dynamic balancing equipment. Therefore, the motor running vibration is very small.

3.Stable performance: key parts such as motor rotor and shaft are equipped with advanced CNC machining equipment to improve the interchangeability of parts.

4.Magnetic tile and carbon brush high efficiency, so the performance is stable, the motor uses double high material high-performance magnetic tile and high-quality carbon brush is more wear-resistant and non-magnetic loss, high efficiency, stable performance, and increased service life.

5.The transmission is stable and the bearing capacity is high: the worm teeth mesh with the worm gear teeth continuously, and there is no process of entering and exiting the meshing, so the work is stable, avoiding the pulsating noise, shock and vibration that instantaneously burst at the time of starting.

6.High safety, low noise, low temperature rise, built-in surge protector, motor rotor is made of high quality silicon steel sheet with copper material, temperature rise under normal load is less than 60K (ambient temperature 25°c), this series adopts high precision Low noise Z4 bearings further reduce noise and losses.

7.which are different from competitors' manufacturing processes. 23 heavy-duty inspections, all massager products including accessories, have achieved standardized design and production. Each product will undergo 20 minutes of silent testing and 40 minutes of performance testing before leaving the factory.

8.Use PTC ceramic heating components consume small power, controllable temperature, fast heating, instantaneous current surge protection, power consumption per hour only ¥0.02

9.The shell of the massager is made with imported original ABS, which is never doped with black material of secondary material. It has high toughness, impact resistance, higher strength and environmental protection. Its raw materials and manufacturing quality are more reliable and synchronized with top-level brands at home and abroad.

10.Low noise and high temperature resistance: the motor casing is made of seamless steel pipe, built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire, so the noise is low and high temperature resistant is good and safe。

11.Over 50,000 times of bionic resistance flexing test, green and environmentally friendly low-carbon formaldehyde-free skin-friendly leather, strictly in accordance with the "one inch and seven needles" international standard, hand-sewn, the length of the stitching is controlled at 0.4cm, and the error is less than 0.25mm. European and American standards will save your cost at least 30%。

12.U.S. DuPont POM Synchronous Gear Massage Head.

13.High temperature 60C°±2C°, low temperature -20C°±2C°, high and low temperature weather resistance recycling test, no cracking, no abnormality, ensuring stable quality.

Rui Rui insists on using environmentally friendly energy-saving materials

Tired to use the Rui Rui massager

Qirui massager for backache

E-mail：qiruigm@gmail.com

WhatsApp:13850385558

Facebook:13850385558