New and Original  ZTE ZXD2400 V4.3 Communication Power Module

1, input mode: single phase three wire system (L/N/PE);

2. Input voltage: rated voltage: 220VAC, fluctuation range: 176VAC ~ 300VAC; in 110 VAC / 120 VAC / 127 VAC grid system power supply: rated input voltage: 110 VAC / 120 VAC / 127 VAC, fluctuation range: 80 VAC ~ 176VAC;

3, input frequency: rated frequency: 50/60Hz, fluctuation range: 45Hz ~ 65Hz;

4, input current: when the AC input voltage is 110VAC/120VAC/127VAC/220VAC, the input current is less than 18A.

5. Surge Current: Under rated input conditions, the starting impulse current is not more than 150% of the peak input current at rated working condition (the peak current caused by EMI capacitor is not considered);

6. Efficiency: Efficiency (> 90%) in 220 VAC system power supply and (> 87%) in 110 VAC / 120 VAC / 127 VAC system power supply.

7, the input power factor is more than 0.99.

8. Output power: rated output power: 2400W, output power: 3195W; 110 VAC / 120 VAC / 127 VAC grid: rated output power: 1500W, output power: 1915W;

9. Output voltage: rated output voltage: 48 VDC, voltage polarity is determined by the connection, adjustable range (value): 42VDC ~ 58VDC continuous adjustable;

10, adjustable range: 42VDC~58VDC continuously adjustable (through external PWM signal regulation);

11. Current Limit Value: input voltage 176 VAC ~ 300 VAC: (53 + 1) A; input voltage 100 VAC ~ 176 VAC: (31 + 1) A; input voltage 80 VAC ~ 100 VAC: (20 + 2) A; after current limit, when the output voltage drops to 35 VDC ~ 39 VDC, sweep back;

12, the precision of voltage regulation is less than or equal to 0.6%.

13. Telephone noise is less than 2mV.

14, broadband noise voltage is less than 50mV (3.4kHz~150kHz) less than 20mV (0.15MHz~30MHz);

15. Discrete frequency noise voltage<5mV (3.4kHz~150kHz), <3mV (150kHz~200kHz), <2mV (200kHz~500kHz), <1mV (0.5MHz~30MHz);

16. Peak to peak noise voltage is less than 150mV (20MHz bandwidth).

17, the average flow capacity between modules: 1.5A below (10% load);

18, insulation strength: input to output: 3000VAC input to the case: 1500VAC output to the case: 500VAC;

19. Leakage current: less than 1.5mA (220VAC input);

20, safety standards: in line with the requirements of GB4943-1995;

21. Electromagnetic compatibility:

22. Reliability: the mean time between failures is MTBF or more than 100000 hours.

23. Cooling mode: forced air cooling cooling mode (rectifier with a DC fan, air flow rate of 42 CFM);

24, working temperature: -5 C ~+65 C;

25, storage temperature: -40 C ~+70 C;

26. Relative humidity: 10%~90% (no condensation);

27, outline size: high * width * Deep: 134mm * 87mm * 341mm (excluding integrated socket);

28, weight: 3.8kg;

 Lead time:
We have a lot of stock ,If the quantity isn't very big , we can send the goods as soon as possible after recieve payment.If big quanity, the lead time need according to the quantity. 
Transporting:
If small quantity, usually send by courier (DHL,FEDEX,TNT and so on) . If big quantity, we advice ship by air or by sea. this will use longer time ,but cheaper fees. We are near the port of TianJin.
Our service:
We can offer the sample. If the quality is good, we can offer very very competitive price .And can pack according to customer's requirment.

1. Could i put my own logo on it? 

> Sure, of course,we have over 18 years OEM experience,customers' logo can be made by laser, engraved, embossed, transfer printing etc. 

2. Should i pay extra for logo printing ?
> If you order amount over out MOQ for OEM package,all OEM fees would be free,if you want to make a trial order,we need to charge a very little fees for the printing and cartons.

3. How about the quality?

We import DU POND brand PA66 nylon raw material from USA,we make sure good quality from the most important factor.
> Acquire the CE & FDA Certification.
> 100% QC in produce process and before package.

4. Could i buy 1pc sample first and small order ?
> Of course, support sample order and small order, especially for new customers under certain condition.

5. How much for 1pc sample ?
> we will send 1 bag for free

6. If i have my thoughts, do you have person to design according to my concept?
> Certainly,our design team is willing to do for you.

7. How long to make a sample? 
> 3days which depends on the samples' complexity.