XYX-3Wheeled walking water well drilling rig
The drilling machine is equipped with a wheeled traveling mechanism and a hydraulic cylinder support. The whole machine is easy to relocate, which is convenient for horizontal adjustment of the drilling machine. It has a hydraulic feeding mechanism to improve drilling efficiency. The drilling machine is equipped with a ball clamping mechanism instead of a chuck. It can implement non-stop reversing bar, high work efficiency, convenient and safe operation. It is equipped with a pressure gauge at the bottom of the hole to indicate the pressure, which is convenient for grasping the condition inside the hole. The lifting and falling towers are hydraulically operated, which is convenient and reliable. The joystick is concentrated, the layout is reasonable and compact, the operation is simple, flexible and reliable.
Machine parameters：
Drilling depth | 100 250 300 600m |
Drilling diameter | 300 200 150 75mm |
Opening diameter | 300mm |
Final hole diameter | 75mm |
Drill pipe | 60mm |
Drilling angle | 90°--65° |
Vertical axis forward speed | 32-1057r/min |
Vertical axis reversal speed | 29-137r/min |
Vertical axis travel | 600mm |
Vertical shaft bore diameter | 96mm |
Vertical shaft lifting capacity | 60kN |
Main winch parameter | |
Single rope lifting speed | 0.5、0.9、1.4、1.9m/min |
Wire rope diameter | 12.5mm |
Brake width | 90mm |
Roll diameter | 300mm |
Roll capacity | 65m |
Mud pump (optional) horizontal three-cylinder BW-250 mud pump:
flow | 250L/min |
Work pressure | 7Mpa |
Inlet diameter | 76mm |
Outlet diameter | 51mm |
Drilling machine dynamic parameters | |
diesel engine | YN27/power60kw/3200rpm |
Motor | Y180L-4 22KW |
Wheeled chassis carrying capacity | 3.6T |
Wheel chassis length | 2.6m |
Wheel chassis width | 2m |
Wheel chassis height | 0.6M |
