Air Blown Micro Optical Cable, buy Air Blowing Mini Optical Cable on China Suppliers Mobile

Product Details

Fiberlink Mini Air Blown Micro Cables is the uni-tube design with small size, light weight, enhanced surface outer sheath fiber unit used for blowing into micro tube bundles by air flow. The outer thermoplastic layer provides a high level of protection and excellent installation properties. It is usually applied in FTTX.

Features

Special complex material loose tube, reduce the shrink of tube in cold temperature.

Accurate fibre length balance, stable mechanical and temperature performance.

Particular technique control, prevent sheath form crinkling during installation.

Structure Innovation in sheath, enhancing the blowing performance.

Applications

Suitable for ducts & aerial fiber optic cable

Local area network system

Long distance communication system

Specifications

Teeminal Index

Cable Type	FLK-MABC（MUT + Cable diameter）
Cable Type	MUT2.0	MUT2.3	MUT2.5	MUT2.8
Fibre Count	2～4	6～12	2～12	14～24
Thickness of HDPE sheath	Nominal value：0.20mm, Average value：0.15mm
Fiber Type	G.G652D, G.657A1, G.657A2 & Multi mode fiber Optional
Nominal Overall Diameter	2.0±0.1mm	2.3±0.1mm	2.5±0.1mm	2.8±0.1mm
Weight	4.0 kg/km	5.0 kg/km	6.0 kg/km	7.0kg/km
Cable Fibre Attenuation(single mode)	0.35dB/km max @1310nm 0.22dB/km max @1550nm
Max. Tensile Strength	40N	50N	60N	60N
Max. Crushing force	600N/100mm
Min. Bending radius -Static / Dynamic	10 / 20 outer Φ
Temperature	Storage -30～＋50℃；Installation-10～＋40℃；Operation-20～＋50℃
Cable service life (estimate value)	25 years

Blowing Performance

Blowing Tool	Typical blowing length
PLUMETTAZ: PR-140,MiniJet-400 etc. Air pressure: 13 bar	Fiber Count	Duct type 3.5/5.0mm	Duct type 5.5/7.0mm
	2-12 fibers	≥800m	≥1500m
	14-24 fibers	≥500m	≥1500m

Mechanical Performance

Item	Testing Method	Testing Results		Specified Value
Tension Performance	IEC 60794-1-2-E1	Optical fibre strain	Additional attenuation	Max. Tensile Strength = Short term Allowable tension≈2×(Long term AllowableTension)
		Short term：≤0.3％ Long term：≤0.1％	Short term:Δa<0.10dB,Δa reversible;Long term: Δa ≤0.03dB
Crush	IEC 60794-1-2-E3	Short term:Δa<0.10dB,Δa reversible;Long term: Δa ≤0.03dBThe outer sheath has no visible crack.		Short termcrushing force=600NLong termcrushing force=300N
Repeated bending	IEC 60794-1-2-E6	After test,Δa ≤0.03dB, The outer sheath has no visible crack		R=20outer Ф
				Bending load=15N
				Bending times=25
Torsion	IEC 60794-1-2-E7	After test,Δa ≤0.03dB, The outer sheath has no visible crack		Torsion angle = ±180℃
				Torsion load=15N
				Torsion times=5
Cable bend	IEC 60794-1-2-E11A	After test, The optical fiber can't be broken; the outer sheath has no visible crack		R=20 outer Ф10 TurnsCycles times=5
*All optical testing proceeded at 1550nm*