Product Details

240W 0-10V dimming constant voltage 24V led driver
1. Features of 240W 0-10V dimming constant voltage 24V led driver:

The output mode:	Constant voltage;
Design:	Noise free & flicker free ;
Technology:	Using active built-in PFC technology;
Effiency:	>90%;
Power factor	>0.95;
Protection:	Short Circuit Protection / Over Voltage Protection;
Waterproof Protection	Aluminum silicone gel potted waterproof IP67 protection;
Dimming mode	0/1-10V/PWM/potentiometer(3 in 1 dimming);
Input voltage:	Full input voltage 90-265V AC;
Certificates:	CE/ROHS/ETL/SAA/TUV passed.

2. Specifications of 240W 0-10V dimming constant voltage 24V led driver
(1) Basic parameters

Model	VGD-0/10V-CV-240W
Output Voltage	24V / 36V
Voltage Precision	±0.5V
Output Current	10A / 6.6A
Output Power	240W(Max)
Line Regulation	1%
Input Voltage Range	90-265V/AC(standard) 85VAC(min)305V/AC(max)
AC Current(Typ)	2.68A@100VAC 2.43A@110VAC 1.1A@220VAC 1.01A@264VAC
Frequency Range	50/60Hz
PFC(Typ)	>0.95@full load
Full-loading Efficiency	>90%

(2) Protection of 240W 0-10V dimming constant voltage 24V led driver

Short Circuit	Short circuit protection / Over voltage protection
Over Voltage	<305VAC

(3) Environment of 240W 0-10V dimming constant voltage 24V led driver

Operation Temperature	-40~+50 ºC
Operation Humidity	20~90%
Storage	-40~ +85 ºC, 10~95%RH
Temperature Coefficient	±0.03%/ ºC (-45~50 ºC )
Vibration Resistance	10~500HZ,2G 10Min/period,X , Y , Z line per 60 mins

(4) Safety&EMC of 240W 0-10V dimming constant voltage 24V led driver

Standard	Refer to EN 61347-1;EN 61347-2-13; EN 62493
Withstand Voltage	I/P-O/P:3.75KVAC
Insulating Strength	I/P-O/P:400M Ω /500 VDC/25 ºC /70%RH
EMC Emission	To Correspond EN55015,EN61000-3-2( >= 50% load)
EMC Immunity	To Correspomd EN55015,EX61000-4-2,3,4,5,6,8,11,A Level of light industry standard(Surge 4KV)

(5) Other information of 240W 0-10V dimming constant voltage 24V led driver

Weight	1200G
Dimension	2466839mm ( LWH)
PCB	94V-0 PC fire retardant
Color	Dark Grey
Packing	442818cm/15pcs

(6) Note
All parameters are measured at normal temperture(25-28 ºC )
1. Ripple & Noise are measured at 20KHz of bandwidth by using a 12" twisted pair-wire teminated with a 0.1 uf & 47uf parallel capacitor(@ full load).

2. The efficiency measured at Max output voltage,and 230VAC with full load,if with 110VAC the efficiency will be lowered 0.5%~1.5%;Working 1~2 hours,efficiency will be higher 1.5%~1%than the initial stage.

3. Mechanical Specification of 240W 0-10V dimming constant voltage 24V led driver

4. Power Factor & THD Characterisics of 240W 0-10V dimming constant voltage 24V led driver

5. Wiring diagram of 0-10v dimmable led driver

6. Certificates of 0-10V dimming led driver

7. The pictures of production line

8. The application of LED drivers

Welcome your visiting to our factory.