High temperature aging room (walk-in), customized by manufacturers

Product features   （Call me 183---6802--1332）

  High-temperature aging room (enter type), customized products is a simulate high temperature, harsh conditions for high-performance electronics equipment, is one of the important experiment improve stability, reliability, electronic products tools, is the production enterprise important production process, to improve product quality and the competitive therefore aging room must also ensure the stability of its own, it must be of high quality, safe and reliable, after to cope with the demand for the development of production at the same time, it also should be flexible, open, have a certain extensibility, has the following features:

1. Practical and stable products

2. Advanced and mature technology

3. Safe and reliable use

4. Beautiful and generous appearance

5. Environmental protection and energy conservation

6. Mute

7. Convenient expansion and relocation

8. Simple operation

9. Management

Excellent after-sales service

With reference to the standard

The relevant standards are:

1. Code for low-voltage distribution design gb50054-95

2. Power supply and distribution design specification gb50052-2009

3. Code for construction and acceptance of grounding device in electrical installation engineering gb50169-2006

4. "classification of combustion performance of building materials" gb8624-2006

Environmental test for electrical and electronic products GB/ t2423.2-2008 part 2: test methods test B: high temperature

6. "code for acceptance of construction quality of ventilation and air conditioning engineering" gb50243-2002

Iii. Technical parameters

1. Internal size: customized according to customer requirements

2. Temperature range: room temperature +10℃ ~ 70℃

3. Temperature fluctuation degree: ±1℃ (no load);

4. Heating rate: 3 ~ 5℃/min;

5. Circulation mode: fan forced circulation mode;

6. Power supply: 380V three-phase five-wire system;

Structure and materials

1. House material: double-sided color steel plate, thickness 0.5mm, Shanghai baosteel plate, good quality, high strength, beautiful appearance, can be used for many years without deformation or peeling.

2, insulation material: high strength rock wool (50mm), flame retardant, insulation, sound insulation effect is good.

3, combustion performance: strong fire performance

4. Test door group 2: single door 80*200cm (W*H), with observation window (25*35cm) above the door

5. Sealing strip: a double-layer high-tension sealing strip is adopted for the test door and room to withstand high and low temperature to ensure the tightness of the test area

6. Temperature measurement body: platinum PT100.

7. Lighting equipment: 50W explosion-proof lighting (4).

8. Test hole: test hole is reserved in the room for external use of test power line or signal line (optional according to customer's actual requirements).

9, distribution control box beautiful, generous, reasonable location setting, easy to operate.

Supply air circulation system and exhaust air cooling system

1. Adopt high quality and large air volume circulation fan, with air suction in the middle and air outlet on both sides to achieve forced convection vertical diffusion circulation.

2, the fan USES three-phase motor, smooth operation, low noise, low power, energy saving.

3. The air circuit is designed with left and right air outlet. The wind speed and pressure meet the test standards, and the temperature is stabilized quickly at the moment of opening and closing the door.

4. Optimized ventilation design, strong air supply circulation, avoid any dead Angle, and make the temperature distribution in the room even.

5, more energy saving, in line with the current international and domestic environmental requirements.

6, more quiet, ≤55 db, better ensure a good office environment and operating environment.

7, very small tube volume and super small volume, ensure the room quiet, generous, beautiful.

8. Easy installation, maintenance and repair.

High quality and reasonable design.

10. All components have high reliability.

Heating system

1. High efficiency fin type stainless steel electric heating tube is adopted.

2. The heating system adopts the hot air circulation heating mode at the top of the room, with uniform temperature distribution and complete independence of the system, which does not affect the control line.

3, temperature control output power is calculated by microcomputer, according to the size of the internal load automatic control of heating power, to achieve high precision and high efficiency of electricity efficiency, more environmental protection, energy saving.

Circuit control system

1. Adopt digital display temperature control instrument

2, direct touch-tone operation, convenient and fast, high brightness digital tube display, cleaning eye-catching

3, time relay, can be set to run time, time to stop automatically

4. Temperature slope setting can freely control the running time and heating rate.

5. Temperature slope setting can freely control the running time and heating rate.

6. The temperature control is synchronously controlled by P.I.D.+S.S.R. system, which can improve the stability and service life of control components and interfaces.

7. Control mode :PID (proportional - integral - differential) automatic calculation, PID control is easy to understand, the use of accurate system model and other prerequisites.

Execution standard

1. GB/T3512-2001;

2. JB/T7444;

Safety protection device

1, with no fuse protection switch

2. Overtemperature protection

3. Sound and light alarm

4. Leakage protection

5. Lack of phase protection

Equipment operating environment

1. Temperature: 0 ~ 35℃.

2. Relative humidity: ≤85%RH.

3. Atmospheric pressure: 86 ~ 106Kpa.

4. No strong vibration around.

5, no direct sunlight or direct radiation from other heat sources.

6. There is no strong airflow around. When the ambient air needs to be forced to flow, the airflow should not be directly blown to the room.

7. No strong electromagnetic field around.

8. No high concentration dust and corrosive substances around.

9. The site is well-ventilated.