Brake pads’ specification:

Rear axle 
Width: 155.1mm
Width 1: 154.6mm
Height: 63.5mm
Thickness: 20.3mm

Vehicle:
BMW

Quality control:
The raw material is from normal  suppliers with testing report,all material should be inspected first,no problem then will be put in storage.The raw material of brake lining are imported like resin.
There is operation instruction in every process,the workers should follow it absolutly.
The tolerance of brake pads' sizes follow the OE,FMSI etc which are the international mutual sizes.

There is professional QC team will inspect goods from the raw material,on line products,finished products to products with packing absolutly follow the national standard of GB5763-2008.

We have testing center equipped with advanced testing machines from China and abroad like Link testing machine.We will make friction coefficient test,wear rate test,shearing test etc in our lab regularly to make sure our products' quality can follow the national standard of GB5763-2008.

Advanced Equipments:

BT Vacuum mixer imported from Korea to ensure the raw material can be mixed evenly.

Imported Isobaric hot press to ensure the thickness,hardness,density of every piece of brake lining can be same.

BT three in one grinding imported from Korea to ensure the thickness,degree of parallelism,flatness,so that the brake shoes can be matched with drum brakes very much,and the braking performance can be better.

During processing brake shoes,the outer arc,width,degree of symmetry,verticality etc can be proved by professional equipments.

Production Capacity:

For brake pads,our annual capacity is 1.5million sets

R&D team:

Cooperating with Qinghua university to research and develop new material.

More than 100 formulars Researched and developed by ourselves,can make formulars according to clients' requirements.

Production Procedure of brake pads:

Brake plate polishing and cleaning-adhesive coating-hot pressing-heat treatment-slotting-grinding-chamfer-polishing and cleaning-spraying-riveting-spraying cody-shrink wrap-packing