8m DIY pneumatic telescopic monitoring mast 30kg
8m DIY pneumatic telescopic monitoring mast 30kg

8m DIY pneumatic telescopic monitoring mast 30kg

USD $1,600 - $1,600 /Unit

Min.Order:2 Units

Supply Ability:
500 Unit / Units per Month
Port:
Xingang
Payment Terms:
T/T Credit Card

Quick Details View All >

Brand Name:
Talents telescopic monitoring mast
Place of Origin:
Tianjin, China
Model Number:
04TAL-M8-2.2-30 telescopic monitoring mast

Dingzhou City Great Wall Daily Chemical Factory

Business Type: Government ministry/Bureau/Commission
Main Products: butane gas cartridge , , ,

Product Details

8m DIY pneumatic telescopic monitoring mast 30kg

Product Photo

8m DIY pneumatic telescopic monitoring mast 30kg8m DIY pneumatic telescopic monitoring mast 30kg

 

 

Product Description

8m DIY pneumatic telescopic monitoring mast 30kg

 

1.Basic specifications

Product name8m DIY pneumatic telescopic monitoring mast 30kg
Material

6063B aluminum alloy

Closed length2.20 m  (Bottom base included)
Extended length8.00m   (Bottom base included)
Max.payload30 kgs
Lifting method pneumatic lifting
Color

light brown

Surface treatment

Phosphoric acid anodizing

Section5

Wind load

65 km/h

Max Working pressure of air compressor 0.20MPA

Working temperature

-15--+60℃  

Inside cable

1pc CAT5 for camera+2pcs AWG14 for light+2pcs RG59 for VHF antenna

Lifting time

 about 3 mins

 

Air compressor

 Power:DC12V 45A  pressure:30PSI  output volume : about 160L/min

Diameter (from top to bottom)

51mm/66mm/82mm/98mm/118mm

 

 

2.Accessories available  photos

 

 

 

 

 

 

Packaging & Shipping

 One unit of telescopic monitoring mast to be wrapped with Poly tapes then two or one sets packed into a carton, carton inner covered by hard foam

 

 

 

 

 

Workshop
 

8m DIY pneumatic telescopic monitoring mast 30kg

 

 

 

Installation

 

A. Fixed mode: achieved by tripod; vehicle mode: fixed by car clamps

B. The telescopic mast should be mounted on a flat and solid foundation. If the mast is tilted or tilted for a long time, its speed will be affected and it will cause damage to the mast itself.

C. The top load of mast should not exceed its conventional bearing so as not to tilt or damage the mast

D. Telescopic mast above 10m or less than 10m (including 10m) carrying more than 5kg must be fitted with pulling cords.

 E. And the mast need be fitted with pulling cords when the wind speed exceeds 14m/s.

 F. Method for erecting a mast with pulling cord (take a three layer pulling cord mounted on the ground as an example):

    a. The telescopic mast should be vertically fixed on the horizontal base.

    b. The position selection of ground anchors. The distance between ground anchor and the bottom center of mast is greater than 2/3 of the height of the mast, and nails shall be driven into ground every 120 degrees.

 

Contact 

 Ms. Karen Wang
Talents Enterprise Company Limited
T: 86 22 28376666 | F: 86 22 28376667 |
whatsapp:0086 182 0221 3131
W: 

 

Contact Supplier

Mobile
12955869357

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Telecommunications > Communication Equipment > Telecommunication Tower
Categories
Hi~