Vehicle Masts 5 meter high
USD $611.86 - $860.13 /Unit
Min.Order:1 Unit
Dingzhou City Great Wall Daily Chemical Factory
Vehicle Masts 5 meter high
Vehicle Masts 5 meter high
Specification: 1)Extended height: 5m 2)Retracted height: 1.7m 3)Outer diameter range:98-82-66-51mm 4)Thickness: 4.0-3.5-3.0-3.0mm 5)Maximum head loads: 40kgs 6)Number of sections: 4sections 7)Wind load :65 km/h 8)pressure of air compressor:0.20MPA 9)Working temperature :-15--+60℃ 10)Air compressor: AC220V /110V 11) Diameter of top plate:150mm, four hole diameter 11mm |
Packing list:
Mian pole in 11 sections: | 1 set |
Air pump(AC220v): | 1 set |
Air hose: | 3 meters |
Bottom base: | 1 piece |
top plate: | 1 piece |
Pulling cord: | 3 sets |
Ground anchor: | 3 pieces |
Clamp: | 1 piece |
Tripal: | 1 set |
Hand operated valve | 1 piece |
Surface color Technology: | phosphoric acid anodizing |
Packing method: | One set to be packed into a carton with inside filled by Polyurethane foam |
Vehicle Masts 5 meter high
1. The telescopic mast is made of aluminum alloy or stainless steel tube.
2. It can help lamplight, camera, Antenna, mobile and military, emergency, illumination,
photography, meteorological measurement equipments rise and drop to a certain
height after its work.
3. It can be mounted on the vehicle or stand on the ground with tripod.
4. It has manual, motorized and pneumatic lifting method, the extended length up to 35m
and closed length to 1.3m.
5. The top payload up to 400kgs, wind load: 80 km/h., working temperature: -15--+60℃.
Except the motorized lifting telescopic mast, we still have manula lifting and pneumatic lifting
telescopic masts available for supply as follows, please refer to the catalogue attached below:
Pneumatic lifting telescopic mast