Product Details

hand lifting crank up aluminium telescoping pole 16m telesoping mast

Product Photo

Product Description

hand lifting crank up aluminium telescoping pole 16m telesoping mast

Basic specifications

Product name	hand lifting crank up alumnium telescoping pole 16m telesoping mast
Closed length	2.60m (Bottom base included)
Extended length	16.00m (Bottom base included)
Max.payload	10kgs
Lifting method	hand lifting
OD	30/40/50/60/70/80/90/105mm
Material	aluminum alloy
Section	8
Finish	Painting
Color	Army green

Accessories available

Packaging & Shipping

One unit of crank up aluminium telescoping pole to be wrapped with Poly tapes then 2 units to be packed into a plywood case

Workshop

15 kg load hand lifting crank up aluminium telescoping pole 10m

Installation

A. Fixed mode: achieved by tripod; vehicle mode: fixed by car clamps

B. The telescopic mast should be mounted on a flat and solid foundation. If the mast is tilted or tilted for a long time, its speed will be affected and it will cause damage to the mast itself.

C. The top load of mast should not exceed its conventional bearing so as not to tilt or damage the mast

D. Telescopic mast above 10m or less than 10m (including 10m) carrying more than 5kg must be fitted with pulling cords.

E. And the mast need be fitted with pulling cords when the wind speed exceeds 14m/s.

F. Method for erecting a mast with pulling cord (take a three layer pulling cord mounted on the ground as an example):

a. The telescopic mast should be vertically fixed on the horizontal base.

b. The position selection of ground anchors. The distance between ground anchor and the bottom center of mast is greater than 2/3 of the height of the mast, and nails shall be driven into ground every 120 degrees.

Contact

		Ms. Karen Wang
		Talents Enterprise Company Limited
		T: 86 22 28376666 \| F: 86 22 28376667 \|
		whatsapp:0086 182 0221 3131
		W: