1, machine operation: automatic
2, motor 30 +5.5 +7.5 kW
3, oil pump: double flow high pressure blade pump
4, package size: length(free adjustment) * width 1100 * height 1250mm.
7, binding method: automatic wire delivery.
Third, semi-automatic waste paper hydraulic baler, horizontal hydraulic baler, 120 tons hydraulic baler working principle installation instructions:
The machine is best placed in the factory to prevent the sun and rain, but it can also be operated in the open air, but it must be careful to prevent rain, and the machine should be covered with tarp before work. After the machine is delivered to the site, it should be placed on a flat and hard ground. If the ground is uneven, it should be filled with cushion wood and cement.
Check that the parts of the machine are complete and that the fastening parts of the joints are loose or abnormal, such as the loose parts found
Please tighten loose parts. If there are any anomalies, please contact the manufacturer for advice.
3, under the guidance of the electrician, the machine is properly grounded, and the grounding line is suitable for 6mm2 multi-strand soft wire.
4, add clean hydraulic oil to the tank, to the oil surface from the top of the tank 4 to 5cm is appropriate(oil level line). Recommended use of hydraulic oil brands: 68 # in the South and 68 # in the North;
The main engine is not equipped with power cord, electric switch or electric control box. Please install it yourself. It is advisable for the power cord, electric switch or electric control box to have a capacity greater than 1-2 times the rated capacity of the motor.