Australia MEPS certified Front Loading Fully Automatic wash machine 5Kg

Mainly Sale Point:

Introduction OlyAir Front Loading Fully Automatic Washing Machine

Top Frame Subassembly :
Mainly including  top frame, PCB, water inlet valve, water level sensor , safety switch.
 
1.   Top Frame :  
Top frame or worktable  provides a frame to fix electrical parts: PCB , water inlet valve ,water level sensor and safety switch . It varies according to  different designs.

 2.  PCB (printed circuit board)
The PCB controls the components of  water inlet valve / pump / motor /retractor ,and so on . Users can select different washing mode and programs by pressing  the button.

3.Water Inlet Valve
There are two kinds of Inlet valve: single water inlet valve and double water inlet valve .it is installed to the rear of  top frame, the action of water inlet valve controlled  by the order of PCB.

4.  Water Level Sensor 
The water level sensor located at the top frame ,consists of a sensor and a  pressure hose. It can detect the pressure of water and transfer the information to PCB

5.  Safety Switch
The safety switch can cut off  the motor power when the cover is lifted during spinning, another function of the safety switch is to  prevent the tub from destroying the cabinet, when the clothes in the tub is out of balance.

6.   Top  Cover
Top cover is one of the main appearance parts of washing machine .there are three types of top cover :transparent cover , non-transparent cover  and cover with transparent window (half transparent )