Product Details

WD12/10 Wind speed and direction sensor is a set of sensors designed to measure wind speed and direction with industrial standards.Its advantages are good dynamic performance, high reliability, high linear accuracy, long life, reliable work.At the same time, its performance meets the recommendations of WMO for wind sensors.

Features

l Strong resistance to lightning interference

l Excellent resistance against impact, overload, shock and erosion

l low wind start

l Anti-wind load can reach 60m/s

l Easy to take, simple to install

Technical Parameters

Category	Wind speed	Wind direction
Operating Voltage	12V-24V	12V-24V
Operating current	<15mA	<15mA
Operating Temperature Range	-40℃～85℃	-40℃～85℃
Operating humidity	0~100%RH	0~100%RH
Start wind speed	≤ 0.5m/s	≤ 0.5m/s
Measuring range	0~50m/s	0~360°
Resolution	0.1m/s	1°
Damping ratio	0.45	0.45
Maximum wind speed	60m/s	60m/s
Output form	RS458	RS458

Installation and use

(1) The wind speed and wind direction sensors should be installed vertically on a cross arm that is more than 1 meter apart.

(2) The lower part of the sensor is sleeved on a boring bar with a diameter of less than φ60mm, and 120° is evenly divided into three M5 thread mounting locations.

(3) When installing the wind vane, the wind bar should pass through the wind direction sensor's wind direction cap first, and install the balance weight next to the wind direction cap's mark. Level the sensor and shake the rod to balance the balance weight and vane. Adjust the wind vane perpendicular to the ground and tighten the brake screw on the wind direction cap fixing the wind direction rod.

(4) The top of the wind sensor has a north pointing sign, which should be aligned with the north when installed.

(5) After the wind sensor is adjusted to zero position, do not loosen the brake screw between the wind direction cap and the spindle.

(6) It is recommended that the wind speed and direction sensor inject oil into the bearing once a year. When oiling, remove the hood and inject the oil from the upper bearing of the sensor.

Packing list

Wind speed sensor 1 set

Wind direction sensor 1 set

Product Manual 1 copy

Certificate 1 copy

Warranty card 1 copy

FAQ for Wind Speed and direction sensor

Q:Can I buy wind direction sensors or wind speed sensors separately?

A:Yes, you can buy it separately

Q:What is the transmission mode of the product?

A:Its transmission is RS485.

Application

Compamy information

FAQ

Q: Are you the final manufacturer?

A: Yes, we are responsible for purchasing raw materials, designing hardware structure and equipment running program.Selection processing plant for parts production.Finally, we will carry out product assembly, equipment commissioning, testing, packaging, etc.

Q: Do you offer free samples?

A: Sorry, we don't offer free samples. You should pay the sample fee and freight.

Q: What payment ways do you accept?

A:You can pay us by T/T,PayPal,Credit Card,MoneyGram.

Q: What is your delivery time?

A: It is in 3-5 working days since the payment confirmed . If quantity is more than 100pcs /order, it will need extra 3-5 working days .

Q: What is the way of delivery?

A: Freight mode depends on time demand and customer requirements.

Q: How is your quality assurance service?

A: Our service is 2 years quality assurance, responsible for free maintenance.

Q: Could we make a visit to your company?

A: Of course, we welcome all the friends' visits.

Contact us