Product Details

PM 2.5 HVAC IAQ AHU for food factory cleanroom

Brand Name Telewin
Place of Origin Guangdong, China
Model Number TZK

Product Features

Product Description

Main Features

• Large Clean Air PM2.5 and VOC Treatment AHU for open office or   factory production space application
• Supply Precious Temp and RH% Clean Air
• Multi-sections serviceable filter type for PM2.5 Treatment
• Built-in Microprocessor Control Console AHU with operation data   display (compatible with wireless control)
• Serviceable Energy Saving EC Fan
• Operation efficiency and energy saving
• Outstanding reliability and performance
• Configured flexibly, numerous options for customization
• HVACR and Industrial Clean Air application

Detailed Images

Frame

• Penta-post extra heavy gauge aluminium profiles and strong fiber-reinforced PE corner connection forming the structural frame
• Superior mechanical strength and rigidity to the unit frame and to prevent any buckling or deformation
• Thermal bridge free design, the profiles filled with polyurethane foam for insulation
• Anodizing surface treatment for profiles, corrosion- resistant

• Stainless steel frame availablele.

Casing Panel and Insulation

• Double skin construction is provided by sandwich type panels  comprising inner and outer painted steel skins and polyurethane  foam with minimum 48kg/m3 density, providing a good thermal  and acoustical performance
• The gasket liner between the panels and frame ensures the air  leakage rate to comply with GB/T 14294 clean air conditioning  requirement
• The factory painted steel sheet covered with 6 insulation  coatings, complies to 500h salt spray testing, showing an  excellent corrosion protection performance

Famous Brand Fan and Motor

• Fan selection based on the air flow and air static requirement is  done by fan selection software

• ZIEHL-ABEGG brushless DC motor
• Built-in intelligent control modular
• Energy saving & High efficiency
• Less vibration & Low noise
• Maintanence-free & Long service life

• Direct driven/ belt driven, forward curve/ backward curve  centrifugal fans, and EC fan is available for option

PTC Electric Heater

• Constant temperature heating
• Virtually unlimited life
• Low electricity consumption and very low in cost
• No electrical noise
• The higher the temperature, the more electricity efficient
• Avoid burning when in contact with combustible materials

Electrode Humidifier

• Cylinder monitor system ensures more efficiency, better  energy saving and stable result
• Drainage pump ensures the humidifying process accurate and  stable
• Clog protection system ensures to avoid water overflow
• Water temperature control system makes sure the drainage  pipe won't be damaged by hot water
• Anti-electric leakage system makes operation and  maintenance safe and secure

Auto Control Console

• Control console designed according to the requirements and  functions of the unit  
• Auto control each section of the unit to make sure the    temperature, humidity and cleaness
• High quality and international brand electrical elements
• DDC and PLC available

High Efficiency Cooling and Heating Coil

• All coils calculation and selection is done by selection  software to match the required conditions
• Large coil face area ensures maximum heat transfer rate
• All coils tested at 30bar pressure underwater 24 hours
• Various corrosion resistance coils for option:
   -Cooper tube with cooper fins coil
   -Epoxy coated fins coil
   -Electrophoresis fins coil
   -Heresite coated coil

Sight Glass Service Door

• Double skin structure, inner panel is made of stainless steel,  and outer panel is made of painted steel sheet
• Positive and negative access door, ensures the airtight of unit
• Convinient to check the running status of the unit
• Double sealing, no air leakage
• Built-in multi-point fastening locks make the panel evenly  stressed, preventing air leakage and loss of energy efficiency of   the unit

Independent Control Damper

• Electric actuated proportional damper (0~10V)

• Variable discharge air volume
• Discharge damper with axial fan, independent control
• High efficiency
• Manual damper available

Electrostatic Precipitator

• Adsorb and remove particles less than 0.01 micron in the air
• Improve indoor air quality
• ESP applies energy only to the particulate matter being collected and therefore is very efficient in its consumption of energy

Stainless Steel Drain Pan

• Slop type design, no drain water carryover
• Avoid the micro-organisms growth inside the drain pan

Antimicrobial Drain Pan is offered as option
• SteriTouch technology Drip Pan Coating
• Antimicrobial surface
• Good exterior durability and corrosion resistance
• Non-toxic, comply with BS476 part 7

Packing & Delivery

Telewin supplies Air Conditioning products to oversea and domestic markets
▲Stable and timely supply guaranteed
▲Carton box and wooden case packing available
▲Customized packing acceptable

Certifications
Client List
Our Exhibition
Our Services

Solutions

Telewin offers One Stop Solutions for
•Pharmaceuticals industry
•Electronics industry
•Automobile industry
•Printing and food industry
•Commercial building
•VOC treatment and environment protection
•Indoor air quality
•Marine ventilation

Services

•Consultancy
•System Design
•Technical support
•Customized manufacturing
•General testing before delivery
•Spare parts supply according to order quantity
•Long warranty period
•OEM service available
Welcome co-operation of energy saving products development

FAQ

1.Are you a factory?
--- Yes, we are a professional AHU manufacturer for more than 20 years.

2.How do you check the goods?
--- We inspect all the materials when they arrive, and have spot inspection during production process. All goods will be tested and double inspected before delivery, providing 100% guarantee for clients.

3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, ESP or TSP, cooling capacity, heating capacity or application for our team to design the suitable unit for you.

4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 1 hour during the working time. All messages will be replied whenever they comes.

5.What's your payment terms?
--- Usually we accept T/T or LC. 30% deposit. Other payment terms can be discussed when orders confirmed.

6.Where is your factory Located? How can I visit there?
--- We located in Foshan, Guangdong Province, which is near Guangzhou Baiyun International Airport and Guangzhou South Railway Station. We can pick you up from the airport or railway station. You are warmly welcome to visit us!

7.Do you provide OEM service?
--- Yes! We provide OEM and ODM service.

8.What's the lead time for your goods?
--- Normally 25 workdays. For urgent orders, we can make special arrangement to fulfill your request. 

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now