Product Details

CNC CARBIDE CIRCULAR SAW MACHINE

Characteristics:

SEPARATING SYSTEM

Separator automatically separates trim edge cut and residue into different storage tanks.

SAW BLADE ANTI VIBRATION DEVICE

Employs an unique electromagnetic brake system to eliminate vibration and sliding caused by gear backlash, ensuring a superb finish cut surface and enhancing blade service life.(Only for CS,CS-S machines)

UNIQUE GEAR HEAD DESIGN

The unique gear transmission system ensures smooth cutting with high efficiency,

less noise,and low power consumption,and enhances saw blade service life.

OIL MIST COOLING SYSTEM

Cools down blade temperature when cutting and provide antirust for cut pieces. Special designed with outwardly open door for easy maintenance and adjustment.

OVERHEAD CLAMPING VISE JAW

Ensure material being clamped firmly and avoid vibration while fast cutting single bar or 2 pieces same size bar at one time.

FLOATING SWIVELABLE REAR VISE SADDLE

This hydraulic floating rear vise saddle, linked to the servo motor and ball screw, is excellent for gripping and delivering even bowed or bent bar, ensuring minimum worn surface and greatest cutting accuracy.

TOUCH SCREEN CONTROL

It's a fuzzy, graphic, colorful,digital and tactile control panel,allowing easy presetting for various work-piece. It has an automatic detector display to indicate operational errors and causes of malfunctions.

MAGAZINE TABLE

Magazine table holds 6 meters long material for loading different sizes of bars. Customized bar loading system is optional for different

Parameters:

Specification		JC-70NC	JC-100NC	JC-130NC	JC-165NC
Cutting Capacity	Solid bar	Ø10-70mm	Ø 10-100mm	Ø 20-130mm	Ø 70-165mm
	Angle profiles	Ø 10-57mm	Ø 10-80mm	Ø 20-100mm	Ø 70-130mm
	Rectangle	Ø 10-57mm	Ø 10-80mm	Ø 20-100mm	Ø70-120mm
	Round tube	Ø 10-70mm	Ø 10-100mm
	Square tube	Ø 10-57mm	Ø 10-80mm
Set the length of the first material max (mm)		10-50	10-60	10-50	10-50
Shortest material length end (mm)		65~( 65+cutting length )	55~( 55+cutting length )	85 ~( 85+cutting length )	85~( 85+cutting length )
Feeding Length(mm)		5-600 Continuously Circulate	5-600 Continuously Circulate	5 - 640 Continuously Circulate	5-640 Continuously Circulate
Rack load (kg)		2500	2500	3600	4600
Bar length (mm)		2000 - 6000	2000 - 6000	3000 - 6000	3000 - 6000
Set material width(mm)		950	950	950	900
Machine model:		JC-70NC	JC-100NC	JC-130NC	JC-165NC
TCT Sawblade		Ø 250-Ø 285*t2.0	2852.0 -Ø 3302.25	Ø 3602.25t2.5(t 2.5 - t2.7)std.	Ø4602.3 t2.7std.
TCT Sawblade		Ø 250-Ø 285*t2.0	2852.0 -Ø 3302.25	Ø 4252.25t2.6(t 2.5 - t2.7)opt.	Ø4802.3 t2.7opt.
Pin Hole + Hole diameter		4Ø11PCD63*Ø 32	4Ø 11PCD63*Ø32	4Ø14PCD80*Ø32/Ø 40/Ø 50	4Ø21PCD90*Ø 50
HSS Sawblade		Ø 250 - Ø 285/ t 2.0-2.5	Ø 285 - Ø 330/ t 2.0-2.5	Ø 360 - Ø425* t 2.5 - t 3.5(4 Ø 11*PCD63+ Ø 32)
Main motor		7.5KWx4P( 10HPx4P )	11kw( 15HP )	11kw x4P( 15HPx4P )	11kw x6P( 15HPx6P )
Spindle speed		17-200RPM	50-180rpm	12-120rpm	30-90rpm
Inverter		11KW( 15HP )	11KW ( 15HP )	11KW or ( 15HP or 20HP )	15KW ( 20HP )
Hydraulic motor		2.2KW( 3HPx4P )	2.2KW ( 3HPx4P )	3.7KW X4P( 3HPx4P )	3.7KWX4P ( 5HPx4P )
Hydraulic pressure		7mpa 70kg/cm ²
Oil capacity		100	120	150	150
Air pressure		0.4-0.6mpa 4-6kg/cm ²
Feeding mode		AC Servo Motor (1.3kw or 1.5kw ) +Ball Screw )
Head drive mode		A.Hydraulic drive ,feed and cut B.AC servo motor ( 1.3kw or 1.5kw)+ball screw )
Feeding dies		Horizontal hydraulic type
Main dies		Horizontal hydraulic type /Over hydraulic type

HSS Saw blade :

TCT Saw Blade :

Metal Pipes /Bar Cutting :

Machine Picture :