Features:
- It is widely used for architectural glass, furniture glass, electric glass, kitchen glass, auto glass, hollow glass, solar glass and so on.
- It can realize automatic-loading, transmission, allocation, optimizing, cutting and breaking at the same time.
- The advanced Italian optimizing-cut software guarantees the safety, stability, speed, accuracy and optimal rate of the machine,
- It can cut 300 different shapes or various shapes by free design.
- Optimal layout is available for minimum leftover and maximum use of glass through optimization software. As the optimal layout can be generated by free assembly of the cutting size.
- Optimization pressure and speed: in figure, straight line, arc pattern, bending start and bending end; accelerating, decelerating, and so on. Automatically adjust the most suitable output for pressure and speed.
- Optimization software directly compatible with cutting software.
- Fully automatic lubrication system.
- Glass location adopts optoelectronic scanning. Some error can be repaired by itself. It can scan the glass shape then change the CAD design.
- Self-diagnose system: The software can show the damaged parts and assist troubleshooting if any vital part, like the shaft/ the motor/ the encoder/ the driving card, goes wrong. It can also regulate to fit the updated motor or drive, “plug-and-play" and easy to repair.
- Can calculate the production capacity by itself.
- Cutter limit protection function.
- Automatic correction to ensure the cutting accuracy.
- Automatic cutting paths selection, Ensure the optimum cutting speed
- Automatic adjustment of cutter pressure for better effect, fast and stable.
- Modifiable origin. The origin can be set twice.
- Special-shaped template scan: a variety of ( including special-shaped ) templates can be converted into CAD graphics through point-by-point scanning.
Parameter:
Automatic Glass Carrying Machine:
Voltage: | 380V/220V 50Hz |
Power: | 9 kW |
Air pressure: | 0.5-0.8Mpa |
Vacuum pressure: | -70~90Kpa |
Loading Sheet size | Min. size:1500*1500mm, Max. size:2440*3660mm |
Loading thickness: | 2~19 mm |
The fastest loading cycle: | 30-60 s |
Transfer speed: | 0~40 m/min |
Max. suction depth: | 750 mm |
Max. loading weight: | 900 kg |
Unilateral upper arm volume: | Four arms |
The number of suction cups in single arm: | Three |
Turning arm: | Double |
Loading position: | Multi-position |
X axis normal moving speed: | 25m/min |
Y axis normal moving speed: | 5m/min |
Table Height: | 900±50mm |
Automatic Glass Cutting Machine:
Voltage: | 380V/220V 50Hz |
Power: | 9 kW |
Air pressure: | 0.5-0.8Mpa |
Cutting size Max.: | 3660x2500cm |
Cutting bridge speed: | 0-150m/min |
Table Height: | 900±50mm |
Glass thickness: | 2-25mm |
Cutting accuracy | ≤±0.20mm |
Cutter head speed: | ≥160m/min |
Cutter location error: | ≤±0.15mm |
Cutting operation: | Air pressure and the spring SMC precision digital display module adopted; the cutter head can revolve 360 degrees; the upper and lower cutter can cut any different glass shapes. |
Oil injection mode: | Automatic oil injection device |
Conveying device: | Automatic synchronous belt transmission device |
Glass positioning: | Dual action of the photoelectric scanning positioning system and machine positioning |
Platen: | imported waterproofing/ fireproofing |
Rack/guide rail: | Taiwan YYC |
Main bearing: | Japan NSK |
Transmission belt / belt wheel: | Italy Bailey |
Cutter wheel/wheel clamp: | Germany Bohle |
PC computer control: | Windows interface |
Servo system: | Japan Omron |
Controlling card: | from Italy |
Electrical parts: | Omron and Schneider |
Main pneumatic parts: | Japan SMC, Taiwan AIRTAC |
Cutting and optimization software: | OPTIMA Italy |
|
|
YR-3725 Flotation breaking table:
Table specifications: | 3600×2800mm |
Table height: | 900±50mm |
The number of fan: | 2 Sets( Independent Switch Control) |
Panel: | high density fiber board |
Table cloth: | black fiber felt |
Founded in 2003, Parker Machinery Co., Ltd has developed an assembly line for door, window, curtain wall and insulating glass equipment. With over ten years' production experience, Parker has become a leading manufacturer of window door machinery in China. The operation of high precision, advancement and specialty ensure that we are able to supply high-quality window and door equipment for customers.
During the past few years, Parker has made great progress and has become well known and outstanding in domestic fairs for window door machinery. With advanced technological equipment, tremendous technical strength and reliable product quality, our window and door equipment has been well received by customers from Russian, Kazakhstan, Vietnam, Iran, etc. We have a perfect sales network and complete service system in China. We are also taking a leading role in setting branch companies abroad.
1.One year warranty time, we can repair and replace parts for free in one year.
2.Technical support in 24 hours online, TM, Skype, E-mail, solving the relative questions in time.
3.Life time free maintenance service.
4.Free training course at our factory with professional engineers.
5.We provide the consumable parts at agent price when you need replacement
1. When can we arrange shippment?
We usually arrange shippment in 15 days after getting deopsit, but customized machines should be more than 25 days.
2.What you can do if my machines have problems?
a.We can send you free components to you if your machines are in guarantee time.
b.We can send our engineers to repair your machines