Product Application

Main Features

1, the integration of the bed, using Q235A-type steel, the whole set of special body stew fire, aging treatment, stereotypes steel good.
2, the total control cabinet and the body of integrated design, easy transportation, installation, operation, stability, higher.
3, LH / RH fixture with a universal interchangeability, left and right fixture tooling can be used interchangeably, the fixture between the equipment also has a universal interchangeability.
4, with a chain-type chip chip removal system, easy to clean, and equipped with oil-water separator, automatic discharge of the cutting fluid within the rail oil.
5, double head, double processing, high efficiency.
6, equipment X, Y, Z axis positioning the maximum speed of up to 56m, 30m, 30m / min.
7, equipped with Taiwan Ou Bolang brand CNC turntable, configured for the fourth axis, positioning accuracy of 20 arc seconds, the maximum close to 0 gap, greatly improve the processing accuracy, a clamping can be achieved 360 degrees processing.
8, fixture configuration clamping switch, fixture clamping pressure adjustable adjustable program, the installation of pressure gauges and voltage regulator, user-friendly design, easy operation, the maximum extent to prevent loose profiles.
9, cable tank chain, the shaft guide and transmission rack, screw with a full protective structure, effectively prevent the processing of debris into, greatly improving the life of transmission parts.
10, with a rail automatic lubrication system, easy maintenance.
11, the allocation of processing water cooling cycle system, the effective protection of the tool to improve tool life, and the configuration of oil and water separator, the effective separation of lubricating oil in the oil, effectively improve the life of cutting fluid.
12, the spindle with the original Taiwan digital grid brand, the maximum speed of up to 15000RPm, because the equipment running up to 12000RPM, the use of down the spindle, its performance and life are much higher than similar products.
13, the original library Taiwan original brand, with 16-bit tool cutter, the adjacent tooling speed of 2.5 seconds.
14, with a rigid tapping function, processing speed, high precision tapping.
15, servo spindle motor can output maximum low speed 23.9Nm, high speed up to 12000rpm, to adapt to steel heavy-duty processing and copper, aluminum alloy processing.

Machine Parts

Name: Turret-style tool magazine

Original: Taiwan

Using large-capacity tool magazine turret from Taiwan enhanced the efficiency of automatic tool changing. The max diameter is 16mm, the min diameter is 4mm, it could process the profile of 20mm.

Main Parts

Name: Motorized Spindle
Brand: HSD
Original: Italy
Domestic famous engines, strong driving force, low fuel consumption, high economic benefits 12F+4R sliding sleeve shift.

Machine Parts

Name: Lubrication & Cooling Syterm
Brand: Accue-Lube & Sagely lubrication Systerm
Original: USA
The cutters adopt Accue-Lube which is semi-open type cooling system in America. This is EHS.

Brand: Fanuc control systerm
Original: Japan
Original Japan Japan control system. With standard data control process can choose graphics and enter the coordinates directly carry on the processing. 

The Systerm can use the CADCAM software drawing and processing. It is very practicality.

Main Parts

Main Parts

Main Parts

Main Features

Double location design, the machine goes on working when feeding profiles interactively, which makes the equipment improve efficiency greatly.

Main Features

There is safe photo electricity protection screen in the front of the machine, equipped with the location of machine head detection, the location of operators detection to insure the safe of operators.

Main Features

The body is welding by steel tube with high quality and be processed by scratch push, so it is stability and strong steel.

Main Features

Pneumatic Components use the Japan SMC Brand.

1. When can we arrange shippment?

We usually arrange shippment in 15 days after getting deposit, but customized machines should be more than 25 days.

2.What you can do if my machines have problems?

a.We can send you free components to you if your machines are in guarantee time.
b.We can send our engineers to repair your machines.