Aluminum window door machine/End-milling Machine for Aluminum & Plastic Door and Window model: LXD-200
1.Equipment introduction
The machine is the special equipment used for PVC and aluminum profile and milling, it can be used for the mullion,step surface and end groves prosess.High-precion main shaft,automatic feeding.Working table can been adjusted in vertical direction by a hand wheel.
Vertical and horizontal position and claming system.
2.Main technical parameters
Model number | LXD-200 |
Working air pressure | 0.4~0.6 Mpa |
Power supply | 380V 50Hz |
Input power | 1.5 kw |
Motor rotational speed | 2800 r/min |
Milling cutter diameter | Ø115 ~ Ø200 mm |
Max. processing hole size | 70×45×200mm |
Contour dimension(L×W×H) | 1060×800×1300mm |
weight(about) | 150 kg |
3.Other photos about LXD-200
4.Other type of end-milling machine photos you may need
1.LXD-250
2.LXDA-200
5.Contact information
6.Certificate