Best Selling He li G Serie 2.5ton Diesel Forklift CPCD25
USD $102,567 - $103,156
Min.Order:1
Newindu Construction Engineering (Shanghai) Co., Ltd.
Best Selling He li G Serie 2.5ton Diesel Forklift CPCD25
Load sensing and double pump confluence hydraulic system technology are adopted to improve operation efficiency and effectively reduce energy consumption.
The special electric control technology of H eli forklift jointly developed with engine manufacturers improves the dynamic performance.
The cooling system and standard distribution liquid reversing system are optimized reasonably, and the reliability of transmission, engine and other key parts is also improved.
The new intelligent gear shifting system is upgraded to prevent the second gear starting and improve the working reliability of the gearbox.
Standard dynamic braking system. A large-capacity capsule accumulator.
Double cylinder structure, which can ensure the endurance and realize automatic switching between cylinders.
The adoption of booster cylinder support improves the convenience of cylinder replacement.
Suspension cab (roof guard) technology.
Fully sealed cockpit and instrument panel, reducing the noise.
Equipped with wide field lifting system and LCD screenwide Angle rearview mirror to improve the view of drivers.
Model |
| CPCD70 |
Rated Capacity | kg | 7000 |
Load Center | mm | 600 |
Overall max. lifting height(with backrest) | mm | 4345 |
Max. lifting height | mm | 3000 |
Height mast retracted | mm | 2500 |
Free lift height | mm | 200 |
Backrest height(from upper face of forks) | mm | 1345 |
Overhead Guard clearance(from face to seat) | mm | 1120 |
Overall height(overhead guard) | mm | 2450 |
Overall length(with forks) | mm | 4800 |
Overall length(without forks) | mm | 3580 |
Front overhang | mm | 590 |
Rear overhang | mm | 740 |
Wheel base | mm | 2250 |
Coupler height | mm | 430 |
Min. ground clearance under mast | mm | 200 |
Overall width | mm | 1995 |
Lateral fork adjustment outside of fork (Max/Min) | mm | 1845/300 |
Tread(front) | mm | 1470 |
Tread(rear) | mm | 1700 |
Outside turning radius | mm | 3370 |
Inside turning radius | mm | 200 |
Min. intersecting aisle | mm | 3040 |
Tilting angles(forward/backward) |
| 6°/12° |
Fork dimensions | mm | 65*1220*150 |
Max. Traveling speeds(With/Without load) | Km/h | 26/28 |
Lifting Speeds(With/Without load) | mm/s | 510/540 |
Lowering Speeds(With/Without load) | mm/s | ≤600/≥300 |
Max. Draw-bar pull, With load | kN | 62 |
Max. Negotiable Gradient(With/Without load) | % | 30/19 |
Service Mass | kg | 9350 |