HELI CPCD35 3.5 Ton Mini Forklift with Good Quality
USD $10,000 - $11,000 /Unit
Min.Order:1 Unit
Newindu Construction Engineering (Shanghai) Co., Ltd.
HELI CPCD35 3.5 Ton Mini Forklift with Good Quality
Aring Zhou
Email: aring at
Wechat/Whatsapp/Mobile: +86 15855426352
Skype: zyy1520724641 at
Web: /
This new series forklift trucks that made with the latest technical design provide you excellent operating performance. HELI forklift trucks high standard performance, comfortable driving experience and the simple and safe operation will make your work handier.
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in case of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug
Model | CPCD35 | |
Load Capacity | kg | 3500 |
Overall Height Fork Raised(with backrest) | mm | 4250 |
Overall Height Fork Lowered(upright) | mm | 2180 |
Backrest Height(from upper face of forks) | mm | 1220 |
Free Lift | mm | 305 |
The Minimum Ground Clearance(bottom of mast) | mm | 135 |
Overall Length(with/without forks) | mm | 3772/2702 |
Wheel Base | mm | 2200 |
Thread(front) | mm | 1000 |
Thread(rear) | mm | 970 |
Outside Turning Radius | mm | 2420 |
Min.Intersecting Aisle | mm | 2400 |