SD13S Crawler Bulldozer with International Bulldozer Parts price
USD $70,000 - $100,000 /Unit
Min.Order:1 Unit
Newindu Construction Engineering (Shanghai) Co., Ltd.
SD13S Crawler Bulldozer with International Bulldozer Parts price
1 The extended track ensures low ground pressure, high reliability and strong traction, contributing to precise operation;
2 The power shift transmission not only ensures smooth power shift, but also reaches target speeds and carries out directional transfers with a single control lever;
3 The wet steering clutch and brake can extend service life. They work interactively, ensuring quick and flexible steering operations;
4 The single control lever can control all blade actions;
5 The drift sealing in the drive wheel, track roller and carrier roller can prevent dust from entering the track system, as well as lubricant leakage, thereby ensuring a long service life;
6 The hexahedron cab features wide visibility, and the insulation materials in the cab can reduce noise and vibrations;
7 The spin type fuel filter and dust separator, the air filters and the other filtration devices can prolong work time and reduce service time;
8 The comfortable cab seat can adjust upward and downward, forward and backward, meeting any positional needs the operator may have;
9 Side engine operation and the combination of a drive/brake operation system and foot brake makes overall operation of the bulldozer more rapid and convenient.
ITEM | UNIT | SD13S |
L×W×H (Ripper not included) | mm | 4492×3185×2950 |
Operating weight (Ripper not included) | t | 13.7 |
Engine | - | Shan g-chai SC8D143G2B1 |
Rated power | kW/rpm | 95.5/1900 |
Gradeability | ° | 30 |
Blade type | - | Straight tilt blade Angle blade |
Blade width | mm | Straight tilt blade 3185×1090 |
Angle blade 3475×915 | ||
Dozing capacity | m3 | Straight tilt blade 3.7 |
Angle blade 3.4 | ||
Ma× drop below ground of blade | mm | 590 |
Lift height of blade | mm | 930 |
Ripper type | Three-shank ripper | |
Ripping depth of ripper | mm | 467 |
Lifting height of ripper | mm | 559 |
Number of carriers (each side) | - | 2 |
Number of track rollers (each side) | - | 6 |
Number of track shoes (each side) | - | 38 |
Width of track shoe | mm | 460 |
Track gauge | mm | 1880 |
Ground length and ground pressure | mm/MPa | 2365-0.063 |
Pitch | mm | 190 |
Forward speed | km/h | 0–3.2 |
0–5.9 | ||
0–9.8 | ||
Reverse speed | km/h | 0-3.9 |
0–7.1 |
Welcome to Contact:
Kevin
Email:kevin(at)
mobile/wechat/whatsapp:+8617621757501