Measurement of Complete Machine:1350×980×1300mm
Weight of Complete Machine:275kg
Engine Power: 4.8kw
Air Pump Displacement:0.036m3/min
Working Pressure :0.4Mpa
Working Voltage: DC12V,DC24V
Coating Bucket Capackity:100kg
Walking Device: Hydraulic stepless speed changing device
Waling Speed: 0-4km/h
Marking Speed: 0-400m/h
Climbing Gradient:15°
Marking Lines Width:150mm/200mm/300mm
Beads Device: 100mm-200mm adjustabe
Raising Spot Gap: Available from5-995mm, deviation ±5mm
Raising Sport Height: 3-7mm
Raising Sport Width:150L bucket-25mm,200L bucket-25mm, 4 lines, also could be customized as per customers’s requets.
Base Marks Thicknees: Available from 1.8-2mm, adjustable

XDTQ-Z150/200/300 selfed-propelled raising line marking machine (marker) is special equipment for all kinds of rasing line marking. Now rasing line are widely used for lines in front of enterprises and institutions, entrance and exit of cross lanes, highway, urban expressway and viaduct in order to remind the driver to drive in right road and drive slowly. The vehicle will vibrate on the raising line which will force the vehicle to slow, and ensure Traffic safety for vehicles and pedestrians. Thus, it can recduce traffice accident, and make the vehicles goes somoothly.

This marking machine with integrated systems of sensor system, micro computer systerm, pneumatic system, hydraulic walking system. It can make both base line and raising vibrating line at same time.
1,The control system of the machine is controled by computer intelligence program and performed by pneumatic elements. It has two functions of automatic control and manual control. The automatic control function could mark the raising line in specific lenth and space which was programmed as per specification on engineering drawings. It is easy to control and operate. The manual functions is used for debugging equipment, cleaning coating bucket and some exceptional circumstances.
2,The walking system of the machine adopts a hydraulic stepless speed changing device imported from abroad. It can work at ideal speed by shift the speed changinghandle when marking lines. And could move forward or back at any time which ensure the line marking project quality and time.
3,The paint bucket was manufactured carefully, esay to operate, walks smoothly. The marking lines marked by it are of good effect, uniform coating, neat shape, clear edges and corners.

4,The matched beads device’s structure is advanced, compacted and convenient for operating. Also, it is flexible, and not necessary to change any parts for marking lines width of 100mm, 150mm and 200mm, the beads spraying rate could meet standard of GB5768.

Instructions:
1,Guide Rod
2,Coating Bucket
3,Liquid Gas Storage Tank Shelf
4,Speed Control Handle 11:44 2018/9/10
5,Program Operating Box
6,Coating Bucket Release Handle
7,Glass Ball Bucket Clutch Wrench Handle
8,Handlebad
9,Coating Bucket Release Handle
10-11,Coating Bucket Gas Switch
12,Glass Ball Bucket Hook Holder
13,Glass Ball Bucket
14,Coating Bucket
15,Coating Bucket Gas Switch
16,Coating Bucket Crank
17,Gasoline Engine
18,Walking Clutch Push-Pull Rod
19,Warning Light Plug
20,Piezometer
21,Gaslion Storage Tank
22,Exhaust Valve
23 Rear Wheel Location Pin

1, 30 Years: 30 years in design, development and marketing relevant products

2, 15 years: 15 years in exporting relevant products to 509m courtries and areas of the world

3, 24 Hours: All enquiries or questions will be responsed and replied within 24 hours