Product Details

Product Description

HQZ hydraulic down-hole drilling rig is a multi-functional drill rig driven by internal combustion engine, the drilling power was provided by hydraulic system except for impacting and the hole cleaning wind. It is convenient and efficient to operate. This drill is the best replacement for traditional pneumatic drills in most operation. The drill is compact in structure, simple in operation, light in total weight. HWQ hydraulic crawler drilling rig is widely used for blast-hole drilling in the mines and quarries. It is also used for anchor in road, railway, power station, civil engineering and building etc.

Main Features

1: These water well drilling rig are small size, light weight, easy to install.
2: These water well drilling rig three major components, host, pump station, console.
3: In the original transport, prospecting roadway can be put into production, the overall structure of the mine play a protective role. These water well drilling rig can also be used for surface 0-90 degree drilling.
4: rig layout flexible, mechanized twist drill pipe, reduce labor intensity, improve work efficiency.
5: the use of box-type to the rack, the holder to tighten, power head rotary drilling, cylinder pull drilling tools, Save the bulky rig.
6: with a linkage function, through the console centralized control, simple and safe, stepless speed.
7: hollow shaft design, drill pipe length is not limited by drilling rig. Can be drilled at any angle of 360 °.

8: disintegration is good, easy to move and transport. Φ33-Φ43 drill pipe can be used with the machine, the replacement only 15 minutes. .

Technology Parameter

The weight(T)	6.5
Dimensions(mm)	344224002800
The hole diameter(mm)	100~300
Drilling depth(m)	200
Once-time advance length(mm)	3000
Walking speed(km/h)	2.5~5
Climbing angles(Max.)	30
Minimum clearance clearance(mm)	250
Using air pressure(Mpa)	1.7-3.5
Air consumption(m³/min)	17-31
Equipped capacitor(Kw)	100
Swing speed(rpm)	55-115
Swing torque(N.m)	8660-11150
Drill pipe diameter(mm)	Φ76 Φ89 Φ102
Drill pipe length(m)	1.5 2.0 3.0
Rig lifting force(T)	20



Adapt to conditions	Loose layers and bedrock
Drilling mode	Hydraulic rotary top drive and propulsion, DTH hammer drilling rig or mud
Impactor	Middle and high pressure series
Optional accessories	After circulating means, mud pumps, centrifugal pumps, generators, foam

Product Real Photos

Factory

Certifications

Contact -Amy

Ms. Amy Jiang

Email:hw010 AT

Mobile phone/Whatsapp/Wechat:

+8615853783389

Skype:luhengtrade